Jensen XA4200 warranty XA4300, Specifications subject to change without notice

®

XA4200, XA4300

Specifications

XA Series 4-Channel.......................................................................................Amplifiers	20 Hz-20 kHz ± 0.5 dB
Frequency Response
Signal to Noise Ratio @ Rated Power	>100 dB
Channel Separation @ Ref. Power	>65 dB, 1 kHz
THD & IMD @ Ref. Power into 2 ohms	<0.8%
Speaker Impedance	2-8 ohms
Input Impedance	47 k ohms
Bass Boost Center Frequency	45Hz
Crossover	12 dB/octave, Butterworth
Power Requirement	14.4 VDC (10.8-15.6 VDC allowable)
XA4200
Power output @ 14.4 VDC, 20-20 kHz
(4 ohms)	50 Watts per channel RMS, < 0.5% THD
(2 ohms)	75 Watts per channel RMS, < 0.8% THD
(4 ohms) bridged	150 Watts per channel RMS, < 0.8% THD
Dimensions	3" x 11.125" x 10" (76mm x 283mm x 254mm)
XA4300
Power output @ 14.4 VDC, 20-20 kHz
(4 ohms)	Front: 50 Watts per channel RMS, < 0.5% THD
	Rear: 100 Watts per channel RMS, < 0.5% THD
(2 ohms)	Front: 75 Watts per channel RMS, < 0.8% THD
	Rear: 150 Watts per channel RMS, < 0.8% THD
(4 ohms) bridged	Front: 150 Watts per channel RMS, < 0.8% THD
	Rear: 300 Watts per channel RMS, < 0.8% THD
Dimensions	3" x 11.125" x 13" (76mm x 283mm x 330mm)

Specifications subject to change without notice.

14

5910 XA4CH_E.p65 14 01/23/01, 12:24 PM