XA4200, XA4300 | ® |
|
Features
XA Series |
|
| ||
• | Easy access top mounted controls | • | Traditional input circuitry – low and high level | |
• | Continuously variable high pass/low pass |
| inputs | |
• | ||||
| crossover | |||
• | 40Hz – 400Hz crossover frequency range | • | Dual status LED diagnostic indicator | |
• | Crossover mode selector switch | • | Thermal, short circuit and low impedance | |
• | Continuously variable bass boost, centered |
| protection circuitry | |
• | PWM MOSFET power supply | |||
| at 45Hz | |||
• | Input level control | • | Discrete amplifier design with complementary | |
• | Remote level control (XA4300) |
| high current | |
|
| |||
|
|
|
| |
Installation
Before You Begin
Before you begin, you will need tools, supplies and adapters. It is best to make sure you have everything you need before you start.
Disconnect Battery
Before you begin, always |
|
disconnect the battery |
|
negative terminal. | + |
| – |
Supplies and Tools Needed
Supplies
•Black electrical tape
•Amplifier Installation Kit
Tools
•Cordless drill with assortment of bits
•Flat and Phillips screwdrivers
•Wire cutters/strippers
•Crimping tool
•
•Wire brush, sandpaper or scraping tool (ground connection to vehicle should be a clean, unpainted metal surface)
3
5910 XA4CH_E.p65 | 3 | 01/23/01, 12:24 PM |