|
| ENGLISH |
|
| |
| Troubleshooting | |
nnSound is interrupted or noise occurs |
|
|
|
|
|
Symptom | Cause | Page |
During playback from the USB memory device, | • When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted. | – |
sound is occasionally interrupted. |
|
|
nnCDs cannot be played back |
|
|
|
|
|
Symptom | Cause | Page |
Cannot playback when the play button is | • The CD is dirty or scratched. Either clean the CD, or insert a different CD. | 32 |
pressed, or cannot correctly play back a specific |
|
|
part of the disc. |
|
|
Cannot playback | • CDs cannot be played back unless they have been finalized. Use a finalized disc. | 33 |
| • This may be caused by poor recording conditions, or the disc itself may be of poor quality. Use a correctly recorded disc. | – |
| • The DATA CD playback function of this unit only supports playback of MP3 and WMA files. | 30 |
“0 0:00” is displayed. | • “0 0:00” is displayed if a disc that cannot be played is loaded. | 32 |
|
|
|
“No Disc” is displayed. | • “No Disc” is displayed if the disc is loaded | 32 |
|
|
|
nniPod cannot be played back |
|
|
|
|
|
Symptom | Cause | Page |
iPod cannot be connected or “Check iPod” is | • When using iPod by connecting it to the USB port, some iPod variations are not supported. | 10 |
displayed. | • When iPod is connected by using a USB cable other than the genuine cable, iPod may not be recognized. Use a genuine USB | – |
| cable. |
|
Preparation
Connections
Playback
Settings
Tips
Appendix
28