ENGLISH
Connecting a PC or Mac
By connecting a computer to the USB port on the rear panel of this unit using a commercially available USB connecting cable, this unit can be used as a D/A converter “Using as a D/A converter” (vpage 20).
Type B
Type A
Computer on which the driver software and audio player software are installed
•Install the dedicated driver software on the computer to enable communication between the computer and this unit in order to playback
•Download the driver software from the
NOTE
•Use a cable that is 10 ft/3 m or less to connect to the computer.
Remote control connection
When you use this unit connected to a Marantz amplifier, this unit receives operation signals sent from the amplifier and operates accordingly.
nnConnection
Use the supplied remote connection cable to connect the REMOTE CONTROL IN connector of this unit to REMOTE CONTROL OUT connector of the amplifier.
nnSetting
Set the remote control switch on the rear panel of this unit to “EXTERNAL” to use this feature.
•This setting will disable remote sensor reception of this unit.
•To operate the unit, point the remote control at the remote sensor of the amplifier.
To use this unit without connecting it to the amplifier, set the remote control switch to “INTERNAL”.
This unit
Set to “EXTERNAL”.
Remote connector cable | Signal flow |
(supplied) |
|
Amplifier
11