Installation | Lanzar Car Audio 232 specs

IN S T A L L A T I O N

PRECAUTIONS

1.Find a suitable location in the vehicle to mount the amplifier.

2.Make sure there is sufficient air flow around the intended mounting location.

3.Bolt the amplifier to the mouning surface.

4.Connect the power ground terminal to the nearet point on the chassis of the car. Keep this ground wire less than one meter (39”) in length. Use 8 gauge wire.

5. Connect the remote terminal to the remote output of the head unit using 14 gauge wire.

6.Connect an empty fuse holder within 300 mm (12”) of the battery and run 8 gauge or larger high quality cable from this fuse to the amplifier location.

7.Make sure there is no fuse in this fuse holder. Then make the connection to the “BATT” connection on the amplifier.

8.If multiple amplifiers are being used, use cables (each with its own fuse at the battery) or a#o or #2 cable from the fuse holder at the battery to a distribution block at or near the amplifier’s location.

9.Connect all line inputs and outputs using high-quality RCA-RCA cables.

10.Insert fuse (s) at the battery fuse holder(s).

11.Recheck all connections before powering up.

12.Set all level controls to their least sensitive positions and set all crossover controls, switches, etc. to the desired frequency or position.

13.Once the system is powered up, set all the volume control on the head unit to about the 2 o’clock position, and then set all the amplifiers’ level controls for maximum output level.

14.Further fine tuning of the various controls may be necessary to obtain the desired results.

Before you drill or cut any holes, investigate your car’s layout very carefully. Take care when you work near the gas tank, fuel lines, hydraulic lines and electrical wiring.

Do not operate the amplifier when it is unmounted. Attach all audio system components securely within the automobile to prevent damage, especially in an accident.

Do not mount this amplifier so that the wire connections are unprotected or in a pinched condition, or likely to be damaged by nearby objects. Be sure to select a location inside your vehicle which has adequate ventilation.

Before making or breaking power connections in your system, disconnect the vehicle battery. Confirm that your head unit or other equipment is turned off while connecting the input jacks and speaker terminals.

If you need to replace the power fuse, only replace it with a fuse identical to that supplied with the system. Using a fuse of a different type or rating may result in damage to your system which isn’t covered by the manufacturer’s warranty.

6 —	V I B E O W N E R ’ S M A N U A L

232 specifications

Lanzar Car Audio 232 is a remarkable car audio system that stands out for its impressive balance of performance, features, and affordability. This car audio setup is specifically designed for car enthusiasts who prioritize sound quality and user experience without plunging deep into their pockets.

One of the main features of the Lanzar Car Audio 232 is its powerful amplifier. It boasts a peak power output of 2,000 watts, ensuring that users get a robust and dynamic audio experience. The amplifier's capability enables it to drive various speaker types effectively, whether standard or high-performance, delivering crisp highs and deep lows that can satisfy any audiophile’s cravings.

Another significant characteristic of the Lanzar Car Audio 232 is its user-friendly interface. The system incorporates a digital display which simplifies navigation through its settings and features. With built-in Bluetooth technology, users can easily connect their smartphones or other devices, allowing for seamless streaming of music and hands-free calling, enhancing both convenience and safety while driving.

The Lanzar Car Audio 232 is also equipped with advanced equalization features. This includes customizable equalizer settings that allow users to fine-tune their audio experience based on personal preferences and the acoustic characteristics of their vehicles. This flexibility ensures that every listener can enjoy audio that suits their unique tastes, whether they prefer booming bass or crystal-clear treble.

Moreover, the system is designed with durability in mind. The components are built with high-quality materials to withstand the rigors of the automotive environment. This means that passionate car audio enthusiasts can enjoy their systems for years without worrying about wear and tear.

Installation of the Lanzar Car Audio 232 is also straightforward, making it an appealing choice for DIY enthusiasts. The provided installation kit includes all necessary components, facilitating a hassle-free setup process.

In summary, the Lanzar Car Audio 232 is an outstanding choice for those looking to enhance their car audio experience. Its robust power output, user-friendly interface, advanced equalization options, durable design, and straightforward installation make it an appealing option for both casual listeners and serious audiophiles alike. Whether cruising through city streets or embarking on road trips, the Lanzar Car Audio 232 promises to deliver an unforgettable sound experience.