OPERATION
•LOUDNESS
Press BND/LOUD button (13) for several seconds to increase bass output and display will show “LOUD ON”. Press it again for several seconds to release this function.
•SET THE CLOCK
Press the DSP button (15), and the clock is shown on the display. Then hold down the button until the clock flashes. Then press the
TUNE/TRACK/SKIP 
button (17) to change hours or
TUNE/TRACK/SKIP 
button (16) to change minutes.
•SELECT MODE
Press MOD button (6) to choose desired listening mode.
•SUBWOOFER
Press MOD button (6) for several seconds to toggle subwoofer output. Press it again for several seconds to release this mode.
•MUTE
Press MUT button (2) to silence the receiver. Press it again to release the mode.
•LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated functions on the display (8).
•EQUALIZATION
Press EQ button (24) to turn on equalization function and to select desired audio mode. There are five kinds of mode as below:
FLAT
CLASSIC
POP M
ROCK M
DSP OFF 
•REMOTE SENSOR
Point the remote control handset to the remote sensor RX (23). Press the function keys on the handset to control the system.
•RESET
RESET button (26) must be activated with either a ball point pen or thin metal object. RESET button (26) is to be activated for the following reasons:
-Initial installation of the unit when all wiring is completed.
-All the function buttons do not operate.
-Error symbol on the display.
Note: If press RESET button (26), the unit can’t work yet, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the front panel.
RADIO OPERATION
•BAND SELECTION
At tuner mode, press BND/LOUD button (13) shortly to select the desired band. The reception band will change in the following order:
FM1 
FM2 
FM3 
AM 
•STATION SELECTION
Press TUNE/TRACK/SKIP 
button
(16)or TUNE/TRACK/SKIP 
button
(17)shortly to activate automatic seek function. Press for several seconds until “MANUAL” appeared on the display, the manual tuning mode is selected. If both buttons have not pressed for several seconds, they will return to seek tuning mode and “AUTO” appeared on the display.
•LOCAL/DISTANCE
Press LOC button (3) to select between local and distant stations. Local setting for reception of strong station, and a distant setting for reception of weaker stations.
•MONO/STEREO
Press MON button (1) to select mono or stereo mode.
9