
OPERATION
You can sometimes improve reception of distant stations by selecting mono operation.
•SCAN
Press SCAN button (25) to set function to scan mode, which scanning to higher frequency station with receivable signal and keep on each station for several seconds.
•AUTOMATICALLY MEMORY STORING & PROGRAM SCANNING
-Automatic Memory Storing
Press AMS button (18) for several seconds, the radio searches from the current frequency and checks the signal strength level until one cycle search is finished. And then 6 strongest stations are stored into the corresponding preset number button.
-Program Scanning
Press AMS button (18) shortly to scan the preset station. When the field strength level is more than the threshold level of stop level, the radio is holding at that preset number for several seconds with releasing mute, then searches again.
•STATION STORING
Press any one of the preset buttons (14) (M1 to M6) to select a station which had been stored in the memory. Press this button for several seconds, current station is stored into the number button.
CD OR OPERATION
•CD OPEN/CLOSE/EJECT
When the front panel is in State 3 and there is no disc in, press button (7), the front panel will slide down to State 2, and then you can insert a disc into the disc slot (5). Then the panel will automatically slide up to State 3.
When there is a disc in, press button (7), the panel will slide down.
Then press EJECT button (4) to stop CD playing and eject the disc from the disc slot (5). Press button (7) again to slide up the front panel.
Button
State 3
Front Panel
State 2
•SELECT TRACKS
Press TUNE/TRACK/SKIP
button
(16)or TUNE/TRACK/SKIP button
(17)to move to the previous track or the following track. Track number shows on display.
Hold TUNE/TRACK/SKIP button
(16)or TUNE/TRACK/SKIP button
(17)to fast reverse or fast forward. CD play starts from when you release the button.
•PAUSE PLAYING
Press PAU button (19) to pause CD player. Press it again to resume play.
•REPEAT THE SAME TRACK
Press RPT button (21) to continuously repeat the same track. Press it again to stop repeat.
10