Error Messages
This section includes a list of some of the most common error messages you might see while configuring and bringing up your SunATM interface. For each message, there is a brief explanation of the problem and a possible solution.
Error Messages from S00sunatm
Cannot find ATM utilities in /etc/opt/SUNWconn/atm/bin; exiting S00sunatm.
The SunATM utility directory /etc/opt/SUNWconn/atm/bin does not exist. Make sure that the SUNWatm package installation completed successfully (see “To Check the Package Installation Using pkgchk” on page 8 for more information). You might need to reinstall the package.
Cannot find atmconfig file in /etc; exiting S00sunatm.
The /etc/opt/SUNWconn/atm/atmconfig file provides configuration information to the S00sunatm script so that it can bring up the SunATM interfaces during system boot. If the /etc/opt/SUNWconn/atm/atmconfig file is not present, S00sunatm prints this warning message and exits. The /etc/opt/SUNWconn/atm/atmconfig file is installed with the SUNWatm package as /etc/opt/SUNWconn/atm/atmconfig.template; if you choose autoconfiguration or if no previous /etc/opt/SUNWconn/atm/atmconfig file exists, pkgadd copies this template file to /etc/opt/SUNWconn/atm/ atmconfig. If a previous /etc/opt/SUNWconn/atm/atmconfig file exists, it is not overwritten. See “Editing the atmconfig File” on page 42.
warning: can't plumb <device>; no UNI version provided
The first entry in /etc/opt/SUNWconn/atm/atmconfig for a physical interface must include a UNI value in the second field.
warning: can't plumb <uni version> on <device>; <uni version> already plumbed
The system encountered an entry that attempted to plumb a signalling version on an interface that has already been plumbed with a different signalling version. The script ignores the new UNI version and continues processing the entry and the remaining entries in the file.
110 SunATM 3U CompactPCI Adapter Installation and User’s Guide • February 2001
