1
CHAPTER 1
Product Overview
This chapter introduces the SunATM155 and SunATM 622 3U CompactPCI
adapters. The features, hardware requirements,and software requirements of these
adapters are described in the following sections:
■“Product Description” on page 1
■“Hardware and Software Requirements”on page 3
■“Overview of the Installation Procedure” on page4
Product Description
The SunATM3U CompactPCI adapters are designed for operation in hot swap
systems that run under Solaris 8 6/00. An on-board FCode PROM provides the
configuration support that identifies the SunATM3U compact PCI adapters to the
system.

Software Features

The SunATMsoftware is compatible with relevant emerging standards (including
existing ATMForum baseline specifications and ITU-TS), and supports:
■IETF RFC 1577 for Classical IP over ATM
■IETF RFC 1483 for Protocol Encapsulation over ATM(except for bridge
encapsulation)
■ATMForum recommendation for UNI 3.0, 3.1, or 4.0
■ATMForum recommendation for LAN Emulation 1.0