6.Pull back the ejection lever.
7.Slide the card out of the cPCI slot.
▼To Extract the Adapter from a Cold Environment
1.Before shutting down the operating environment and halting the system, ensure that all significant application activity on the server has stopped.
2.Follow the appropriate procedures, as documented in the system’s service manual, to shut down and halt the system.
Refer to the system’s documentation for the complete power down procedure.
3.Press the power switch on the system’s status panel to power down the system. Refer to the system’s documentation for the location of the power switch.
4.Verify that the system’s power LED is off (unlit) indicating that the system is completely powered off.
Once the system has been shut down and powered off, you can safely extract the card.
5.Pull back the ejection lever.
6.Slide the card out of the cPCI slot.
Chapter 3 Installing and Extracting the Adapter 21
