TABLE 5-7laneconfig Flag Requirements and Options (Continued)

Interface

MAC Address/ELAN Name

ATM Address

VCI

Flag

 

 

 

 

 

required

illegal

xor1

xor

s

required

illegal

illegal

illegal

m

1xor means that you can use either the ATM Address field or the VCI field, but not both.

Note Designate unused fields in the /etc/opt/SUNWconn/atm/laneconfig file with a dash.

Using Variables in the laneconfig File

You can use some of the predefined variables from /etc/opt/SUNWconn/atm/ aarconfig file in the /etc/opt/SUNWconn/atm/laneconfig file. These variables are listed in TABLE 5-8. For a complete description of how to use these variables, see “Using Variables in the aarconfig File” on page 47.

Note Using predefined or user-defined variables in the MAC address field of local (‘l’) entries is not supported. Variables may be used in the MAC address field of other entry types, such as in table (‘t’) entries.

Note You cannot use the $prefix variable, or any other variables that use it (including $myaddress), on interfaces that are not using ILMI address registration.

TABLE 5-8Predefined SunATM Variables

Variable

Description

 

 

prefix

The 13-byte prefix associated with the local switch.

mac

The 6-byte MAC address associated with the local host or

 

interface.

sel

The default 1-byte selector for the local interface.

macsel

The concatenation of $mac:$sel.

myaddress

The concatenation of $prefix:$mac:$sel, resulting in the

 

default address for the local interface.

 

 

56 SunATM 3U CompactPCI Adapter Installation and User’s Guide • February 2001

Page 78
Image 78
Sun Microsystems 3U manual Using Variables in the laneconfig File, 8Predefined SunATM Variables