06 VCD/CD/MP3/MPEG-4/USB/SD | Lanzar Car Audio SD34MIP instruction

06VCD/CD/MP3/MPEG-4/USB/SD

Before You Start

Number Buttons

During playback, you can select any track

directly by using 24 Number Buttons( 0~9).

The selected track will be played automati-

Program Playing

During VCD/CD mode, press 13 PROG, the TFT displays the program menu. Pressing NUMBER BUTTONS to select the track

Specifications

cally.

Note:

*This function is operated by using remote control only.

Setting the Playback Time

During CD playback, first press 2 GOTO, and TFT shows : disc go to:--:--,press your desired time of the playback by using num- ber buttons. Secondly press GOTO button, track go to:--:--appears on TFT, also input your desired numbers to play the current time of your selection.

During VCD mode, press 2 GOTO button to set the playing time, when the TFT dis- play : track/disc time/track time/repeat/time disp. Press [ ][ ] to select the options, press ENTER to set the status.Then press 24 NUMBER BUTTONS or [ ][ ] to set the current status.

During MP3/USB/SD mode, press 2 GOTO first to display : ---/all track, input the numbers to play the desired track. Press 2 second : --:--to adjust the playing time.

During MPEG-4 mode, press GOTO first to display : select:---, input the numbers to play the desired track. Press GOTO seco- ndly : time-:--:--to adjust the playing time.

Note:

*This function is operated by using remote control only.

MO/ST Selector

During VCD playing, repeatedly press 6

AUDIO button to select the mode as bellow:

Number and then press 22 to move the cursor to START, press ENTER to start program playing; move the cursor to EXIT and press ENTER to exit the program playing. Move

the cursor to and press ENTER to the

previous page; move the cursor to and press ENTER to the next page.

During this process, press 19 or PROG to cancel the program playing.

Note:

* The function is only valid on remote control.

Playing PBC (Menu)

During VCD status, first pressing 3 TITLE, PBC playback starts and the menu of entire disc appears on the monitor. And then you can select your favorite track by using 24 Number Buttons. When a track is playing, you can press 4 MENU button to return to the menu if you would like to end the track and select others. To cancel PBC playing, press 3 TITLE button again.

Note:

*This function is operated by using the remote control.

*PBC playing confirms to version 2.0 of SVCD/ VCD disc only.

General

Power Requirement	14.4V DC
	(11-16V allowable)
Load Impedance
Max.Power Output	80W X 4
Tone Controls	10dB
	Bass 100Hz
	Treble 10KHz
Dimensions	Approx.192 x 178 x50
	mm (d/w/h)
Mounting	Approx.169 X 182X53
Dimensions	mm (d/w/h)
Weight	Approx.1.75kg

FM Tuner Section

Tuning Range	87.5-108(MHz)
(Optional )	(Europe)
	87.5-107.9(MHz)
	(U.S.A.)
	65-74(MHz)
	Russia)
IF Range	10.7MHz
Usable Sensitivity	10dBuV
(-30dB)
Signal-to-noise Ratio	60dB

AM Tuner Section

Frequency Range	522-1620(KHz)
(Optional )	(Europe/Russia)
	(Europe/Russia)
	530-1710 (KHz)
	(U.S.A.)
IF Range	450KHz
Usable Sensitivity	35dBuV
(-20dB)

CD Player Section

VCD Signal System	PAL/NTSC
Signal-to-noise Ratio	60dB
Separation	55dB(1KHz)
Distortion	0.1%

DVD Player Section

Number of channel	2 channels
Frequency Response	5Hz to 20,000Hz
Dynamic Range	98dB
Signal-to-Noise Ratio	60dB
Wow and Flutter	Less than
	measurable limit

Mono left Mono right Stereo

Note:

*This function is operated by using the remote control.

Stereo Separation	30dB 1KHz
Frequency Response	30-15000Hz

Note:

Due to continuous product improvement, specifications and design are subject to change without prior notice.