08Tuner
Before You Start | 01 |
Band Selector
During radio status, repeatedly press 3
BAND button to select bands in the
following order:
FM1 
FM2 
FM3
MW2(AM2) 
MW1(AM1)
(For Two Bands)
FM1 
FM2 
FM3
LW 
MW
(For Three Bands)
Note:
*Press 8 button on the head unit also performs the same function.
DX/LOC Selector
During radio status, press 5 LOC button on the remote control to select strong or weak station reception.
1It is set to LOC mode when 5 LOC button
is first pressed. LO appears on the display and only local station is available.
2It is switched to DX mode when 5 LOC is pressed again. Both distance and local stations can be received.
Notes:
*The initial mode is DX mode.
*Press LOC on the head unit or set LOCAL in RADIO MENU also performs the same function.
Location of the Controls
Front Panel
6 | 1 | 3 | 4 | 9 18 | 11 | 2 |
Manual/Automatic Tuning
Manual Tuning: Repeatedly pressing 22 ( 
or 
)button on the remote control con- tinuously to select a station downward or upward respectively.
Automatic Tuning: Press 22 ( 
or 
) button for more than 3 seconds, the radio automati- cally searches a station downward or upward respectively and plays when it finds a station.
Note:
*Press 12 button on the head unit also performs the same function.
MO/ST Selector
During radio status, you can press 6 ST button on the remote control to select Mono mode or Stereo mode.
1 Stereo reception is charged when ST appears.
2It is switched to MONO mode when MO appears.
Note:
*To set STEREO in RADIO MENU also performs the same function.
12 | 7 | 8 17 14 15 | 5 |
Base
13 | 10 | 16 | 19 |
Selecting the Station
During radio mode, press 22 
to select the
upward station, press 
to select the down- ward station.
Note:
*First press AMS on the head unit , and then press 12 button on the head unit also performs the same function.
On-screen display
Briefly press 8 OSD to show the RDS
menu, press and hold it to display the
current source information.
Note:
*This function is operated by using the remote control.
38 | 7 |