Before You Start, Additional Information | Lanzar Car Audio SD34MIP

Before You Start

IMPORTANT SAFEGUARDS About this manual

Additional Information

Simple Troubleshooting Guide

1. Be sure to connect the color coded

leads according to the diagram.

Incorrect connections may cause

This unit features a number of sophisti- cated functions ensuring superior operation. All the functions have been

The following checklist might help to solve the problems which you meet when using the unit. Please double check and make sure if the connection and the procedure of the operation is properly before using the checklist below .

	the unit to malfunction or damage
	the vehicle, s electrical system.
2.	Be sure to connect the speaker (-)
	leads to the speaker (-) terminal.
	Never connect the left and right
	channel speaker cables each other
	or to the vehicle body.
3.	Make sure all the connections are

designed for the easiest possible use, but many are not self-explanatory. This manual will help you understand the functions and operations of the unit. This manual main explains remote control operation. However, in

Problem

No power.

Some errors occur in the LCD or no function when pressing the button.

Cause/Solution

. Check and make sure whether the fuse is blown, replace with the proper value if necessary.

. Press RESET button.

completely correct before turning

on your unit.

4. When replacing the fuse(s), the re-

placement must be of the same am-

perage as shown on the fuse holder.

5. Do not block vents or radiator pa-

nels. Blocking them will cause heat

to build up inside and may result in

fire.

6. After completing the installation and

beginning to play the unit(including

replacing the battery), please remove

the front panel at first, and then press

RESET button on the base with

pointed object (such as ball-point

pen) to set the unit to initial status.

addition to those functions related with DVD/VCD/CD/MP3/MEPG-4/USB operation that can only be operated by the remote control, there are also functions can be operated by the buttons provided for the main unit.

Unable to receive stations.

Poor effect on receiving a station.

CDs cannot be loaded.

Sound skips.

No images.

Images skip.

Note:

Check and make sure whether the antenna is inserted or the antenna is properly connected, if not, insert the antenna or connect it properly.

Antenna may not be the proper length. Make sure the antenna is fully extended; if broken, replace the antenna with a new one.

The antenna is poorly grounded, check and make sure the antenna is properly grounded at its mounting location.

A CD is loaded in the mechanism.

The CD is dirty or damaged.

The Video line from main unit to the TV is not connected properly.

Improper setting of the color system. Set the color system to PAL or NTSC according to the connected television.

If any of the problem persist after check list had been made, consult your nearest service dealer. Never

attempt to disassemble your unit by yourself.

Due to continuous product improvement, the operations

are subject to run the model.