Maintenance

Before You Start

Replacing the Fuse

Make sure the amperage matches the specified value when replacing the fu- ses. If the fuse is blown, check the po-

Tuner

Scanning/Memorizing Stations Automatically

During radio status, you can press 4 AMS button on the remote control to scan each stored station 5 seconds respectively which stored in 24 Number Buttons (from 1 to 6). You can press the corresponding Number Buttons or AMS button when your desired station is charged. And it starts playing that

Selecting Station Directly

Press 2 GOTO button, the monitor shows:

FR:, input the number to receive the station

of this frequencies.

Note:

*This function is only operated by using rem- ote control.

wer connection and replace with a n-

Insert the Battery Holder into the Remote

station.

ew one. If the same problem occurs, it would be subjected to the malfun- ction. In such cases, please consult to the nearest service dealer.

Control.

When press and hold 4 AMS button, it will activate automatically memory storing fun- ction. The radio automatically selects a station and has it stored in any one of the Number Buttons from 1 to 6.

Notes:

!Warning

Never use the fuse with the rated amperage more than that supplied to your unit, otherwise it will damage the unit.

Replacing the Battery

When the range of the operation of the card remote control becomes short or no functions while operating. Replace the lithium battery with a new button cell (CR2025). Make sure the battery polarity before replace.

Precautions on Using Lithium Battery

Always keep the lithium battery beyond children s reach. In case swallowed, see a doctor immediately.

Cleaning the battery with a dry cloth, to ensure its perfect connected.

Make sure the proper polarity when loading with the battery.

To prevent short circuit, do not use metal tweezer to clip the battery.

*Press AMS on the head unit also performs the same function.

*The unit can be stored up to 6 stations for each band.

*Regarding the function of Number Buttons, refer to Number Buttons for more inform- ation.

Number Buttons

During radio mode, Number Buttons from 1 to 6 24 can help you store your favorite station. You can follow the steps as below:

When receiving a station, press and hold any one of the Number Buttons until CH i (i=1~6) appears on the LCD, which in- dicates that station is already stored in the corresponding number button.

You can store up to 18 FM stations (6 each for FM1,FM2,FM3),up to 12AM stations

Gently pull out the Battery Holder while	! Warning
pressing the Stopper.	Improperhandle with the batter may
	lead to explosion.
	It cannot be charged, disassembled
	or thrown into a fire.

Put the button-type battery with mark(+) upward into the Battery Holder.

(6 each for AM1/MW and AM2/LW).