OPERATION
A: Expert menu
In expert menu, the following operation will be allowed:
-Use 
/ 
to select Beep on or off.
-Use 
/ 
to turn the Clock display on or off.
Note: With the expert menu on, when select clock on, the current time will be displayed on the up right of the screen, and you can see the time is changing. When exit the expert menu the clock will be displayed on the up right of the screen.
When select clock off, the current clock will be stopped, when you exit the expert menu, the clock display will be turned off.
-Use 
/ 
to turn the Zone on or off. (only in radio mode, you can change Zone to ON.)
-Use 
/ 
to select the mode of time between 12H/24H per day.
B: Dual Zone
For the front speaker, use 
/ 
to select corresponding items.
How to operate dual zone, please refer to the following Smart Mode Operation section.
C: Clock adjustment
Using 
/
to select the hour and minute. Then using 
/ 
to change the value of the hour and minute.
Note: Tap the Reset bar on the screen will
reset the time to “00:00”. D: Wallpaper selection
Use 
/ 
to select the wallpaper among: Blue, Black and Cyan.
3) DVD SETUP
Please refer to the DISC (DVD, VCD, CD, MP3) OPERATION part in this instruction manual.
4) DEFAULT
Tap the DEFAULT bar on the SETUP menu, you will be asked “Are you sure to load factory default setting?”, if you want to select default setting, tap ENTER bar on the screen or press OK
button on the remote control to confirm, and “Load factory ok ! ” will appear on the screen.
Note (FOR THE UNIT WITH TEL-
MUTE AND BRAKE FUNCTION)
1)When there is an incoming call, the unit will be in mute state, and “TEL MUTE” appears on the screen display.
2)If the brake wire isn’t connected to the ground (when driving, in BRAKE OFF), the picture will not be shown on the screen in DVD/AV mode for safety purpose. Only the audio will be heard.
Smart Mode Operation
Shortly press
1)When the current mode is TUNER,BT press
2)(Only for the unit with navigation function.)
When the current mode is NAVI, Press
19