Kicker Unlocking Features and Security Settings for Amplifiers

Page 15

Security MENU - Here you can lock down your amplifier to prevent any access to the settings. The DEFAULT screen is still active and you can select any of the four presets... but that is it!

UNLOCK AMPLIFIER

You do remember your lock code right? You better because that is now the only way in! If you have not changed it then it is still at the factory default of 123.

UNLOCK AMPLIFIER - cont.

If you enter the wrong code the display will flash the mes- sage BAD CODE and then return you to UNLOCK screen.

AMP1 AMP2

You will need to call KICKER directly at (405) 624-8583 to handle this situation. You will need your amplifier’s serial number AND your receipt as the guys and gals answering the phone will need this information from you to help you out.

Operation

Press the ENT key to enter the SECURITY menu.

Use the UP and DOWN keys to

select LOCK IT UP or DON’T LOCK

and then press the ENT key to accept your setting.

ESC HOME ENT

ESC HOME ENT

To unlock your amplifier press the ENT key. The display will show UNLOCK. Press the ENT key again. You will now enter your code to unlock the amplifier.

2 Times

ESC HOME ENT

LOCK LEFT SYS RIGHT MUTE GAIN EQ LPF HPF PHASE KOMP

bad code

MEM-1

MEM-2 MEM-3 MEM-4

AMP1

AMP2

LOCK LEFT SYS RIGHT MUTE

GAIN EQ LPF HPF PHASE KOMP

 

unlock

MEM-1

MEM-2 MEM-3 MEM-4

So...before you call, gather this information up and have it ready to save us some time on the phone. Cool? Cool!

Better yet, take the time RIGHT NOW to fill out the first page in this manual and STAPLE your receipt to it. That way if or when you need service (like forgetting your lock code) you will have all the information you need right there in front of you.

Operation

If you selected LOCK IT UP the display will now show UNLOCK and the LOCK indicator will be on . The menus are now locked.Press the ESC key to return to the DEFAULT scrolling screen.

AMP1 AMP2

LOCK LEFT SYS RIGHT MUTE

GAIN EQ LPF HPF PHASE KOMP

unlock

MEM-1 MEM-2 MEM-3 MEM-4

If you selected DON’T LOCK then you will return to the MAIN menu and the amplifier will remain unlocked.

NOTE...

The ESC and ENT keys move the blinking cursor left or right to select which character to enter.

Use the UP and DOWN keys to enter the character.

(A, B, C...1, 2, 3...etc)

When you are finished press and hold the HOME key for 1.5 seconds to enter your unlock code.

ESC HOME ENT

ESC HOME ENT

ESC HOME ENT

Press the ENT key to enter your

 

 

lock your code again.

ESC HOME

ENT

 

 

Enter your code again making sure to place the correct character in the correct position in the display. Blank spaces count as part of the code so be sure you are entering it correctly.

Press and hold the HOME key and try again. If you have found your error then the amp will unlock. If not, the flashing BAD CODE will greet you and you can try again.

If you have tried several times (several is defined as more than 3...less than 10) and you still can not unlock your

While your amplifier is in lock down you will notice the LOCK indicator on the ISIS VFD display is lit. This indicates your amplifier is locked down and will require a code to unlock it before any adjustments can be made.

If the code is correct the amp will unlock and drop you back

into the MAIN menu. If not, then read on...

amplifier, this more than likely means means you have forgotten your lock code.

28

SX .1 Series Amplifiers

SX .1 Series Amplifiers

29

Image 15
Contents Page SX650.1 / SX1250.1 FeaturesVFD Display VFD DisplayM1 M2 M3 M4 Installation End Panel ViewsMounting Single Speaker or Voice Coil WiringInstallation Multiple Speakers or Voice Coils Parallel WiredAmplifier Strapping Multiple Speakers or Voice Coils Series WiredAmplifier Strapping with Remote Bass Control Using the Signal Output Jacks PastNavigation Using the Remote Bass Level Control & BlastMenu System Lo-Pass Hi-Pass Phase Mute Kompressor SecuritySystem GainESC key to return to the Sick ESC Noise OFfC...1, 2, 3...etc Sick BAYESC Home ENT A, B, C...1, 2, 3...etc Memory-1 Memory-2 Memory-31V, 2V, 4V, 8V LOW Medium HighSelect Skip Reset or do Reset Boost/cutEQ frequency, bandwidth Menu Press the ENT key to enter LO-PASS adjustment menuATTACK, and OFF Kompressor adjustment menuDegree and 180 degree Mute OFFTimes Then press the ENT key to accept your settingUnlock Amplifier Unlock AmplifierPhase Memory PresetsLO-PASS HI-PASS €Green LED off, no output Troubleshooting€Other Symptoms HelpPerformance Model SX650.1 SX1250.1 RMS PowerDynamic Power KompressorHeight Signal-t0-Noise RatioPower & Ground Terminals DSP Reaction Time / DelayPizza Delivery Chic’s Numbers Hook Ups

SX650.1, SX1250.1 specifications

Kicker is known for its dedication to delivering top-tier audio performance, and the Kicker SX1250.1 and SX650.1 amplifiers stand out in the realm of car audio. Packed with robust features and innovative technologies, these amplifiers cater to both novice and expert audio enthusiasts.

Starting with the Kicker SX1250.1, this powerhouse monoblock amplifier is specifically designed to deliver a staggering 1,250 watts RMS at 1 ohm. With the ability to push your subwoofers to their limits, it provides deep, impactful bass that enhances your music experience. The SX1250.1 features a variable low-pass crossover, allowing users to fine-tune the cutoff frequency to perfectly match their subwoofers. Additionally, it is equipped with a built-in subsonic filter, which helps to eliminate unwanted lower frequencies that can lead to distortion.

The SX1250.1 utilizes advanced technology such as the Kicker's exclusive FIT (Fail-Safe Integration Technology), ensuring maximum compatibility with a variety of vehicle audio systems. This technology also aids in minimizing voltage loss and maximizing sound quality, resulting in an impressive audio output. The amplifier's thermal and short-circuit protection circuitry guarantees reliable performance, preventing overheating and ensuring longevity.

On the other hand, the Kicker SX650.1 is another exemplary model that emphasizes versatility and efficiency. This mono amplifier delivers 650 watts RMS at 1 ohm, making it suitable for smaller systems where space and power consumption are of concern. The SX650.1 also includes a variable low-pass crossover and bass boost feature, allowing users to customize their audio settings to suit their listening preferences.

Like its larger counterpart, the SX650.1 is built with FIT technology, ensuring a secure connection to your vehicle's audio system. Its compact design makes it easy to install in tight spaces without compromising on performance. Kicker has also included an integrated heatsink design to enhance cooling efficiency, ensuring optimal performance even during prolonged use.

Both the SX1250.1 and SX650.1 amplifiers boast a stylish and sleek appearance, with a distinctive Kicker logo that complements any audio setup. Whether you are a bass enthusiast seeking high-performance output or a casual listener looking for quality sound, the Kicker SX amplifiers deliver exceptional audio experience that is hard to match, making them a wise investment for any car audio lover.