Specifications
34
Kompressor
Here is a brief explanation of each KOMPRESSOR setting.
Contour - This preset applies expansion below the threshold point to provide a fuller sound at lower volume levels. Effect decreases at higher volume levels. Nice effect for someone wanting a fuller sound at low to moderate listening levels.
ATTACK - This preset applies expansion above the threshold point to provide a nice quick punch or attack to the music. Effect increase with higher volume levels. Like music with a quick and punchy sound? Give this one a try.
OFF - Pretty much says it all. This turns the KOMPRESSOR off. This is the factory default setting.
After selecting your KOMPRESSOR setting you can adjust its effect using the KOMPRESSOR ADJUSTMENT (KOMP ADJ.) setting located in the SYSTEM menu. There you can change the threshold point for each of these settings to customize the KOMPRESSOR effect to fit your speakers, car or personal tastes.
The possibilities are almost endless! Tweak away!
SX .1 Series Amplifiers
Performance
| Model | SX650.1 | SX1250.1 | |
|
|
|
|
|
|
|
|
|
|
RMS Power |
|
|
| |
In Watts, All Channels Driven |
|
|
| |
@ 13.8V, 4Ω Mono, 1.5% THD | 325 x 1 | na | ||
@ 13.8V, 2Ω Mono, 1.5% THD | 650 x 1 | 625 x 1 | ||
@ 13.8V, 1Ω Mono, 1.5% THD | na | 1250 x 1 | ||
Dynamic Power |
|
|
| |
In Watts, All Channels Driven |
|
|
| |
@ 14.4V, 4Ω Mono, 1.5% THD | 325 x 1 | na | ||
@ 14.4V, 2Ω Mono, 1.5% THD | 650 x 1 | 625 x 1 | ||
@ 14.4V, 1Ω Mono, 1.5% THD | na | 1250 x 1 | ||
Length With EndKaps | 16” | 22.50” | ||
|
| (40.64cm) | (57.15cm) | |
Fusing | 30A x 2 | 150A x 1 external | ||
Recommended Power & Ground Wire | 4 GA | 2 GA | ||
SX .1 Series Amplifiers
Specifications
35