Kicker SX650.1 Amplifier Strapping with Remote Bass Control, Using the Signal Output Jacks Past

Page 7

Installation

AMPLIFIER STRAPPING WITH REMOTE BASS CONTROL

The Remote Bass Level Controller can be used to adjust the output level of both the amplifiers that are strapped together.

1.) Mount the Remote Bass Level Controller in the front of your vehicle and plug in the supplied cable.

2.) Route the supplied cable to the primary amplifier and connect to its BLAST In jack.

3.) Enjoy!

BACK VIEW

SIDE VIEW

SUPPLIED

CABLE

Mounting Surface

SOURCE UNIT

USING THE SIGNAL OUTPUT JACKS (PAST)

The Output (Pre Amp Signal Transfer) RCA jacks allow you to send the incoming signal from one Kicker SX series amplifier to another amplifier or processor without the need for Y cables. The signal from the PAST jacks is identical to the signal fed to the amplifier via its RCA input jacks and is not affected by any of the amplifier’s built-in digital signal processing.

Most head units with high voltage outputs should be capa- ble of driving up to ten amplifiers in a chain.

SOURCE UNIT

AMP STRAPPING

Installation

AMP STRAPPING

AMP STRAPPING

_

+

AMP STRAPPING

To Next Amplifier or Processor

12

SX .1 Series Amplifiers

SX .1 Series Amplifiers

13

Image 7
Contents Page SX650.1 / SX1250.1 FeaturesVFD Display VFD DisplayM1 M2 M3 M4 End Panel Views InstallationMounting Single Speaker or Voice Coil WiringInstallation Multiple Speakers or Voice Coils Parallel WiredAmplifier Strapping Multiple Speakers or Voice Coils Series WiredAmplifier Strapping with Remote Bass Control Using the Signal Output Jacks PastNavigation Using the Remote Bass Level Control & BlastMenu System Lo-Pass Hi-Pass Phase Mute Kompressor SecuritySystem GainESC key to return to the Sick ESC Noise OFfC...1, 2, 3...etc Sick BAYESC Home ENT A, B, C...1, 2, 3...etc Memory-1 Memory-2 Memory-31V, 2V, 4V, 8V LOW Medium HighBoost/cut Select Skip Reset or do ResetEQ frequency, bandwidth Menu Press the ENT key to enter LO-PASS adjustment menuATTACK, and OFF Kompressor adjustment menuDegree and 180 degree Mute OFFTimes Then press the ENT key to accept your settingUnlock Amplifier Unlock AmplifierMemory Presets PhaseLO-PASS HI-PASS €Green LED off, no output Troubleshooting€Other Symptoms HelpPerformance Model SX650.1 SX1250.1 RMS PowerDynamic Power KompressorHeight Signal-t0-Noise RatioPower & Ground Terminals DSP Reaction Time / DelayPizza Delivery Chic’s Numbers Hook Ups

SX650.1, SX1250.1 specifications

Kicker is known for its dedication to delivering top-tier audio performance, and the Kicker SX1250.1 and SX650.1 amplifiers stand out in the realm of car audio. Packed with robust features and innovative technologies, these amplifiers cater to both novice and expert audio enthusiasts.

Starting with the Kicker SX1250.1, this powerhouse monoblock amplifier is specifically designed to deliver a staggering 1,250 watts RMS at 1 ohm. With the ability to push your subwoofers to their limits, it provides deep, impactful bass that enhances your music experience. The SX1250.1 features a variable low-pass crossover, allowing users to fine-tune the cutoff frequency to perfectly match their subwoofers. Additionally, it is equipped with a built-in subsonic filter, which helps to eliminate unwanted lower frequencies that can lead to distortion.

The SX1250.1 utilizes advanced technology such as the Kicker's exclusive FIT (Fail-Safe Integration Technology), ensuring maximum compatibility with a variety of vehicle audio systems. This technology also aids in minimizing voltage loss and maximizing sound quality, resulting in an impressive audio output. The amplifier's thermal and short-circuit protection circuitry guarantees reliable performance, preventing overheating and ensuring longevity.

On the other hand, the Kicker SX650.1 is another exemplary model that emphasizes versatility and efficiency. This mono amplifier delivers 650 watts RMS at 1 ohm, making it suitable for smaller systems where space and power consumption are of concern. The SX650.1 also includes a variable low-pass crossover and bass boost feature, allowing users to customize their audio settings to suit their listening preferences.

Like its larger counterpart, the SX650.1 is built with FIT technology, ensuring a secure connection to your vehicle's audio system. Its compact design makes it easy to install in tight spaces without compromising on performance. Kicker has also included an integrated heatsink design to enhance cooling efficiency, ensuring optimal performance even during prolonged use.

Both the SX1250.1 and SX650.1 amplifiers boast a stylish and sleek appearance, with a distinctive Kicker logo that complements any audio setup. Whether you are a bass enthusiast seeking high-performance output or a casual listener looking for quality sound, the Kicker SX amplifiers deliver exceptional audio experience that is hard to match, making them a wise investment for any car audio lover.