![](/images/new-backgrounds/1316611/3166117x1.webp)
Remote Control Functions
1 | MUTE | POWER | 7 |
|
|
8
2 | CH |
3 MENU
4 | CH | |
9 | ||
|
5 | MODE | CALL | TIMER | 10 |
|
|
|
| |
6 | LANG | SYS | SEL | 11 |
|
|
|
| 12 |
1.Mute: Push to "Mute" the volume.
2.: Press this button to select between a Mirror or Normal screen image.
: Press this button to flip the screen image vertically.
3.POWER: Press this button to turn the unit "On" or "Off".
4.MENU: Press this button to select a desired menu.
5.MODE (Picture Mode): Press to select between Personal, Standard, Soft, Vivid and Light picture settings.
6.LANG (Language Mode): Press to select display language.
7.POWER: Press this button to turn the unit "On" or "Off".
8.CH : Press these buttons to scroll through a menu Up or Down.
9.CALL: Press to close the menu.
10.TIMER: Press to select the shut off time. When the timer expires the monitor will automatically shut off.
11.SEL: Press this button to select a video sources (CAM1, CAM2, CAM3 and DVD).
Note 1: When the left turn signal is acti- vated CAM1 (left side view camera) is selected automatically.
Note 2: When the right turn signal is activated CAM2 (right side view camera) is selected automatically.
Note 3: When the vehicle is put into reverse CAM3 (rearview camera) is selected automatically.
12.SYS: Press to select PAL, AUTO, N443 or N358.
General Operation
Turning the Monitor On:
The monitor is operational by activating the ignition key then manually pressing the power switch on the unit.
Adjusting the Brightness
Press the buttons on the monitor to adjust the brightness of the monitor.
Brightness | Brightness |
Up | Down |
4