Installation Instructions

The monitor can be mounted via a pedestal-mount, U-support bracket or a flush-mount.

Pedestal Mounting the Monitor

1.Loosen the thumb wheel on the base support so the nut attached to the thumb wheel can slide into the monitor’s mounting channel.

2.Slide the thumb wheel nut into the channel on the back of the monitor.

3.Position the monitor to the desired height and tighten the base support thumb wheel.

4.Adjust the tilt lever.

5.Use the double-sided foam (supplied) or mounting screws (not supplied) to secure the base support to the desired location.

Monitorís

Mounting

Channel

Base Support

Thumb Screw

Tilt Lever

Nut

Double Sided

Mounting Foam

1.Select a position to mount the monitor that is free of obstructions and moving parts and has a proper viewing angle.

2.Remove the mounting bracket from the monitor and use it as a template to drill the mounting holes.

3.Position the monitor mounting bracket and align with pre-drilled holes, then secure bracket with screws (not supplied).

4.Secure the monitor to the mounting bracket using adjustment thumb screws.

Angle Adjustment

Thumb Screw

CH-

POWER

SEL