Magnadyne M125C Front Panel Video Input, Technical Specifications, Auxiliary Video Input

Page 7

Front Panel Video Input

Yellow RCA: Video (Cable Not Supplied)

Auxiliary Video Input

You can connect the video output signal of a digital camera, camcorder or video device. Select the auxiliary video input mode by pressing the SEL button on the monitor until DVD appears in the display.

Cable Suggestions: Radio Shack #42-2551 or #42-2483.

Technical Specifications

7” TFT-LCD color monitor

Audio output: 1 watt

Front speaker

Power supply: automobile storage battery (12-32V)

Power consumption: about 10 watts

Outer dimension: 182mm (W) x 122mm (H) x 26mm (D) without flush mount 198mm (W) x 138mm (H) x 31mm (D) with flush mount

Dot pitch: 0.321 (W) x 0.372 (H)

Resolution: 480 x 3 (RGB) x 234

Contrast: 250:1

Brightness: 450cd/m2

Viewing angle: U: 30 / D: 60, R/L: 60

Operating temperature: -20 ~ +70O C, RH90%

Storage temperature: -30 ~ +80O C, RH90%

7

Image 7
Contents Owner’s/Installation Manual Introduction Table of ContentsVideo Input Jack Monitor Features and ControlsLED Power Indicator LCD Screen Turning the Monitor On Remote Control Functions Adjusting the Brightness General OperationCamera View Selection and A/V Input Adjusting the VolumeMirror/Normal Camera Image System Menu Monitor AdjustmentPicture Menu Option MenuFront Panel Video Input Technical SpecificationsAuxiliary Video Input Black Wire Ground GND Wiring DiagramPedestal Mounting the Monitor Installation InstructionsSupport Mounting the Monitor Removing the Flush Mounted Monitor Flush Mounting the MonitorDo Not Troubleshooting MaintenanceSymptoms Solutions ONE 1 Year Limited Warranty Warranty