Magnadyne M125C Flush Mounting the Monitor, Removing the Flush Mounted Monitor, Do Not

Installation Instructions

Flush Mounting the Monitor

1.Locate a suitable location for mounting the monitor (In-Dash, In-Wall, Headrest, etc.). Then cut a 7-1/8" (W) x 4-7/8" (H) opening and insert and secure the flush-mount housing.

2.After securing the housing, insert the monitor into the housing. Do Not Apply Pressure Directly to the LCD Monitor’s Screen. Utilize the outer edges to gently push the monitor into the housing until it snaps into place.

Mounting Screws

(Not Supplied)

Cut a 7 3/8" x 5" Opening

“Snap”

Do Not
Press	on Screen

“Snap”

“Snap”

“Snap”

Removing the Flush Mounted Monitor

1.Insert the detaching piece as indicated. Press in and lift up and the monitor will be released from the flush mount.

2.Remove the monitor.

10