CD Player Operation

2 MEM

3 PGM

5 RDM

6 INT

3 PGM

5 RDM

4 RPT

3 PGM

2 MEM

3 PGM

Inserting and Ejecting a Disc

Pull the tab at the top of the CD Door, and the door will open. Push a disc into the CD Slot (20), label side up, and the disc will begin to play.

Press the EJECT button (16) to stop CD play and eject the disc. The disc will also eject auto- matically when the CD Door is opened.

Select Tracks

Press the or button (5) to move to the previous track or next track. The track number appears in the Display Area.

Fast Forward and Fast Reverse

Press and hold the or button to fast for- ward or fast reverse. Disc play starts from when you release the button.

Pause Disc Play
Press the	button (18) to pause the CD

player. Press it again for several seconds to resume play.

Repeat the Same Track

Press the button (9) for several seconds to continuously repeat the same track. Press it again for several seconds to stop repeat.

Play All Tracks in Random Order

Press the button (10) for several seconds to play all tracks on the current disc in random order. Press it again for several seconds to stop random play.

Intro Scan

Press the button (11) for several seconds to play the first 10 seconds of each track. Press it again for several seconds to cancel the function and listen to the track.

Program CD Tracks

Use the Program function to select up to 32 CD tracks to play in any order. The Program function allows you to select a track number for each spot in the playing sequence. A CD must be inserted to use the Program function.

1. Press the button (8) for several seconds to enter Program mode. PGM starts flashing and the “P-01” appears in the display.

2.Press the or button to choose a track

number. Then press the button (7) to memorize it. Select the next track and it will memorize will be “P-02”.

Repeat these steps to program tracks in the

desired order. Then press the button for several seconds to play the CD in programmed order. When you have programmed 32 tracks, “FULL” will appear in the display.

• When the CD is played in programmed order,

press the button for several seconds, then press it again for several seconds to exit the PGM mode.

• When the CD is playing in programmed order,

pressing the button for several seconds will clear all the programmed content and “CLR” will appear in the display.

• If you don’t press the button (7) to carry

out program setting, press the button (8) for several seconds, “NO-P” will appear in the display.

Direct Track Access

While a CD music disc is playing, the station recall buttons 0 thru 9 can be used to access and play CD tracks directly (no need to scan or advance the tracks manually one-by-one to find the one you want to listen to). If you know the music track number you want to listen to, press the station recall button(s) that correspond to the desired track.

For example, if you are listening to track “1” and

you want to hear track “3”, press button. “T-03” will be displayed and track 3 will begin to play.

If the music track you want to listen to has a dou- ble digit number such as “15”, press 1 and

then press . The display will show “T-15” and track “15” will begin to play. You can direct access any track at any time.

Note: If you select a track number that does not exist on the CD, “NO TR” will be displayed. Select another track.

Track/Time Display

To display the running time/remaining time of a track, press the AS/PS ELAPSE button (14).