Bogen BOGEN WV100, WV250 Manual, WV150 Speakers, Transformer-Coupled Speaker Connections

Page 8

Connections

Speakers

Transformer-Coupled Speaker Connections

Transformer-coupled, constant voltage speaker loads are connected to their respective load type (i.e., 70V speakers to the 70V terminal, 25V speaker systems to the 25V terminals) and the COM terminal. Make sure the selector switch is in the TRANS position. A separate 8-ohm terminal is provided to drive 8-ohm (low-impedance) speakers through an output transformer tap.

The speaker terminals can accept up to a #10 spade lug and have integral clamping plates that make wiring easier.

4-Ohm Low-Impedance Speaker Connections

A low-impedance (4Ω) speaker load can be driven directly without transformer coupling by connecting the load to the 4Ω terminal and the GND terminal. Make sure the selector switch is in the DIR position.

Bypassing the output transformer and driving the speaker load directly provides the advantage of better bass response.To maximize the power delivered to the speakers, their combined load impedance should be 4 ohms. Connecting higher load impedances is electrically acceptable, but the mismatch in load impedance will cause the speaker load to only receive a portion of the power that the amplifier is capable of delivering. It is not acceptable to connect low-impedance speakers to the 70V and 25V outputs.

Typical connections to a 70V transformer-coupled speaker

Typical connections to a low-impedance (non-transformer-coupled) speaker load

Note jumper link shorting the

GND to the COM terminal.

Note switch is set to DIR

Note switch is set to TRANS

Note jumper link shorting the

GND to the COM terminal.

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Installation and Use Manual Important Safety Information Domestic and International ListingsContents Wall-Mount Power Vector Front Panel Panel DescriptionsWall-Mount Power Vector Module Bay Rear Wall-Mount Power Vector Connector Board RearInstallation Package ContentsFront Panel Input Connector MountingModule Installation ModulesOutput Modules Input ModulesConnections SpeakersTransformer-Coupled Speaker Connections Ohm Low-Impedance Speaker ConnectionsRemote Volume Control Mute ControlBridging Mix Bus COM and GND TerminalsSystem Expansion of Power Vector Amplifiers Front Panel Controls & Indicators OperationOutput Limiter Trans Output / Direct Out Selector SwitchRear Panel Controls Block Diagram Specifications Troubleshooting Warranty Accessories/Components

WV250 Manual, BOGEN WV100, WV150 specifications

The Bogen WV150, WV100, and WV250 are part of Bogen's versatile line of public address systems designed for various applications. Each model packs unique features while sharing common technologies that enhance performance and usability, making them ideal for businesses, schools, and other institutions that require effective audio solutions.

The Bogen WV150 is a powerful yet compact unit that delivers excellent sound quality. It features a 150-watt amplifier that ensures clear audio distribution, making it suitable for mid-sized venues. The unit comes with an integrated mixer, allowing users to connect multiple microphones and playback devices seamlessly. The WV150 also supports various input types, including XLR for professional microphones and RCA for media players, enhancing its versatility.

Bogen's WV100 is designed for smaller settings or personal use. This model boasts a 100-watt amplifier for clear sound at lower volumes. It’s ideal for classrooms and small group presentations. The WV100 is lightweight and portable, featuring a built-in carrying handle. Despite its smaller size, it still incorporates an intuitive mixer and multiple input options, making it an excellent choice for educators and small businesses.

The WV250 offers higher power output at 250 watts, making it suitable for larger venues such as auditoriums or outdoor events. This model includes advanced digital signal processing features, improving sound quality and reducing distortion. The WV250 also includes a built-in compressor circuitry for dynamic range management, ensuring that loud sounds don’t overpower quieter ones, thus maintaining a consistent audio experience.

All three models rely on Bogen’s commitment to reliability and sound fidelity. They feature durable housings designed to withstand the rigors of daily use while remaining aesthetically pleasing. Each model includes user-friendly controls, making it easy for anyone to operate without extensive training.

In summary, the Bogen WV150, WV100, and WV250 are robust public address solutions packed with features designed for a range of applications. From the portability of the WV100 to the robust power of the WV250, these models are engineered to provide clear, reliable audio for any setting. The combination of performance, flexibility, and build quality positions Bogen's WV series as a leading choice in public address technology, catering to diverse audio needs across varied environments.
Top Page Image Contents