![](/images/new-backgrounds/1002445/244527x1.webp)
Specifications
Power Output (RMS): | WV100: 100W | (140W Typical, @1 kHz/0.1%/4Ω) |
| WV150: 150W | (200W Typical, @1 kHz/0.1%/4Ω) |
| WV250: 250W | (340W Typical, @1 kHz/0.1%/4Ω) |
Frequency Response |
|
|
Transformer: | ||
Direct: | ||
Distortion |
|
|
Transformer: | 0.5% THD+N, Maximum, | |
Direct: | 0.1% THD+N, Maximum, | |
|
| |
Fundamental: |
| |
With Aux Module: |
| |
With Mic Module: |
| |
With Tel Module: |
| |
Tone Controls |
|
|
Bass Frequency: | 100 Hz (+/- 10 dB minimum) | |
Treble Frequency: | 10 kHz (+/- 10 dB minimum) | |
Low Cut Frequency: | 125 Hz @ | |
Sensitivity: | 0.4V (at backplane connector) | |
Output Regulation: | 2 dB or better no load to full load | |
Output Impedance |
|
|
70V, 25V, 8 ohms; balanced or unbalanced | ||
Direct Coupled: | 4 ohms unbalanced | |
Tape Out |
|
|
Output Level: | 4 VRMS @ FRP |
|
Output Impedance: | 50 ohms maximum | |
Protection: | Thermal, | |
Line Fusing: | Resettable circuit breaker | |
Cooling: | Thermally controlled | |
Power Consumption: | WV100: | 2.0A @ 120V AC, 60 Hz |
| WV150: | 3.5A @ 120V AC, 60 Hz |
| WV250: | 5.5A @ 120V AC, 60 Hz |
Dimensions: | WV (all models): | |
| BBF: | |
| BBS: | |
| WMAD: | |
Product Weight: | WV100: | 27 lb. |
| WV150: | 29 lb. |
| WV250: | 28 lb. |
| BBF: | 14 lb. |
| BBS: | 18 lb. |
| WMAD: | 11 lb. |
*Referenced to
12