Legacy Car Audio LCD18M Trouble Shooting, Problem Cause Solution, Tuning Control, Band Button

Page 5

TROUBLE SHOOTING

Before using the check list please make all the connections first.

If you still have questions after going through the checklist, please consult your local customer service representative.

PROBLEM

CAUSE

SOLUTION

 

 

 

 

 

If the power supply is properly

No power

The car ignition is not on.

connected to the car, switch the

 

 

ignition key to " ACC "

 

The fuse is blown

Replace the fuse

 

Another CD is present in the

Remove CD in the player, then insert

 

player

a new one with label face up

 

Disc incorrectly inserted

Insert the CD with label face up

Disc cannot

upside-down

 

CD is extremely dirty or

Clean the CD or try a different CD

be loaded or

defective

 

ejected

 

 

Temperature inside the car is

Give enough time for the temper-

 

 

too high

ature in the vehicle to cool down.

 

 

 

 

Condensation

Turn off the player for at least an

 

 

hour, then try again.

No sound

Volume is too low

Adjust volume to desired level

Wiring is not properly

Check the wiring connection

 

 

connected

 

 

 

 

 

 

The installation angle is more

Adjust the installation angle to less

Sound skips

than 30 degrees

than 30 degrees

 

 

CD is extremely dirty or

Clean the CD or try a different CD

 

 

defective

 

 

 

 

The radio does

The antenna cable is not

Insert the antenna cable firmly

not work

connected

 

 

 

 

 

 

 

 

 

Page 7

14. TUNING CONTROL

Rotate this control at radio mode to select your desired radio broadcasting station. The selected frequency will appear on the LCD display.

15.BAND BUTTON

In radio mode, press the BAND button for AM or FM reception. The character of the selected band will be visible on the display.

In CD/MP3 format-mixed disc playback mode, long press BND button, it will change from CD mode to MP3 mode(the defaulted mode is CD).

This BAND button as a search function during MP3 playback: During MP3 mode:

Press the BAND button short, it is activated as cyclical selecting song mode as following: -> TRACK SERIAL NUMBER SEARCH -> THE FIRST CHARACTER

SEARCH -> DIRECTORY SEARCH

1)In TRACK SERIAL NUMBER SEARCH selecting song mode, the MP3 T 000 will be visible on the LCD display and the hundreds digit 0 that the MP3 disc contain will flash.

Press the + or - button to select and enter the number on the flashing digit place from 1 to 9.

Then press the SEL button to confirm the entered number and the 0 on the tens digit will be flashing.

Press the + or - button to select and enter the number on the flashing digit from 1 to 9.

Then press the SEL button to confirm the entered number and the 0 on the units place digit will be flashing.

Press the + or - button to select and enter the number on the flashing digit from 1 to 9.

After finishing enter all the number of the song serial number on the flashing digit, press the SEL button to play the corresponding track.

2)In the FIRST CHARACTER SEARCH selecting song mode, the A--......, will

be visible on the LCD display. (If there are files names its first character are A, the......is the first file name its first character is A by the order of A~Z and

0~9; otherwise, the ......is NONE.)

Press the + or - button to select files that the first character by the order of A~Z and 0~9.

Then press the >> or << button to select one file its first character is the selected one. Finally press the SEL button to play the selected file.

3)In DIRECTORY SEARCH selecting song mode, the root folder will be visible on the LCD display. (If there is not a root folder in the current MP3 disc, you will find a root named ROOT.)

Then press the + or - button to select a desired folder.

And then press the >> or << button to select a desired track in the folder. Finally press the SEL button to play the selected track.

16&17. +10 AND LOC/-10 BUTTON

During the normal playback of CDs in MP3 format:

Press +10 and LOC/-10 button to move up and down10 tracks at a time. When the remained total tracks is lack of 10, the both buttons are inactively. During RADIO mode, press the LOC/-10 button to change local reception or distance reception. (Note: This operation is for FM reception only)

Page 4

Image 5
Contents Page Welcome 3.SELMENU Button and Volume UP + / DN Buttons Installation MethodBeep 2ND, Beep ALL, Beep OFF Mode Location and Function of ControlsWiring Diagram Problem Cause Solution Trouble ShootingTuning Control Band ButtonPrecautions and Maintenance Precaution of Disc PlayDisp Button Release Button