Kramer Electronics user manual Connecting the VM-22H 2x12 Hdmi Switcher/DA

4 Connecting the VM-22H

i	Always switch off the power to each device before connecting it to your
	VM-22H. After connecting your VM-22H, connect its power and then
	switch on the power to each device.

To connect the VM-22Has illustrated in the example in Figure 2:

1.Connect the HDMI source (for example, a DVD player) to the HDMI IN 1 connector.

2.Connect the HDMI source (for example, a DVD player) to the HDMI IN 2 connector.

3.Connect the HDMI OUT connectors to up to two HDMI acceptors, as follows:

HDMI OUT 1 connector to an LCD TV

HDMI OUT 2 connector to a plasma display

4.Connect the 5V DC power adapter to the power socket and connect the adapter to the mains electricity.

5.Press the EDID SETUP button to acquire or change the EDID information (see Section 5‎ ).

Figure 2: Connecting the VM-22H 2x1:2 HDMI Switcher/DA

6 VM-22H - Connecting the VM-22H