Bogen PM-3180, PM-3000 manual Prec VOX, Mic Set Up, To Set MIC Parameters

Page 31

Programming

Mic Set Up

This function lets you set the Microphone features:

•Precedence Activation:

N.O. = Normally Open - requires short between precedence terminals to activate mic

N.C. = Normally Closed - requires short between precedence terminals to deactivate mic

VOX = Voice Activated switch activation)

•Automatic Level Control (ALC)

•Phantom Power (PPS)

•For MIC B, it also permits setting the input as a transformer-balanced 600-Ohm input for telephone paging applications.

Note: Changes made during MIC Setup will not be activated until you exit the programming mode.

The factory defaults are listed below:

 

Feature

MIC A

MIC B

Precedence Activation

VOX

VOX

Automatic Level Control

On

On

Phantom Power

On

On

1.Enter the programming mode and press the NEXT or BACK buttons until MICROPHONE appears on the display.

2. Press ENT to enter the function.

To Set MIC Parameters

1.Select the Mic to be configured by pressing either the MIC A or MIC B buttons. If, for example, you press MIC A, the display shows the precedence setting for MIC A: A PREC VOX, which indicates that the MIC A-precedence acti- vation is set to VOX.

A PREC VOX

2.Press the NEXT or BACK buttons to scroll available options: VOX, N.O. and N.C.

3.Press ENT to store the selection and proceed to the next feature. The PROG LED will blink to indicate that data was stored.

26

Page 30 Page 32
Image 31
Page 30 Page 32
Contents User’s guide Models PM-3000 & PM-3180 User’s Guide Publication No July Owner’s Information Contents Conventions AccessoriesUnpacking Packing ListDescription IntroductionPM-3000 includes FeaturesProMatrix units have the following features PM-3180 has these additional featuresFan Outlet PM-3180 only Do Not Block Install Control PanelQuick Start To mount the control panel in a remote locationBasic Wiring = highest, 6 = lowest Factory Programmed ConfigurationMicrophone Feature Default Options Input Priority LevelTo Select an Amp or Preamplifier Channel To Apply Power to the UnitBasic Operation Understanding the Control PanelTo Control Bass or Treble To Control VolumeTo Select a Specific Input To Return to Auto SwitchingTo identify which amplifier is under manual control Important Operational Notes Aux Input Trim AdjustmentRear Panel Model PM-3000 Rear Panel Model PM-3180 Auxa Infrared Remote Controller Outputs For PM-3000 Preamplifier Wiring InformationOutputs For PM-3180 Amplifier AUX Inputs Audio Process Link Wiring PM-3180 OnlyAux Input Trim Controls Mic B/Tel MIC InputsMic a Mic BTo Select an Amp/Channel To Apply Power to the ProMatrix UnitUser Operation ProMatrix Control PanelTo Control Volume, Bass or Treble Important Operational Notes To Return to Auto SwitchingProgramming Enter Programming ModeProgramming Menu DefaultsAssignment A1/AUXAProgramming Prec VOX Mic Set UpTo Set MIC Parameters Press ENT to store the selec ALC on PPS OFFIN-MIC Press ENT to store the selectionPresets A1/AUX A-0 Remember to press ENT after setting each levelA1/AUXA Volume LimitProgramming Inhibit A1/VOL OFFAux Mute Amplifier Link PM-3180 Only A1 LNKPswrd PasswordLabels AuxaPress ENT to confirm the selection Factory DefaultsCLR ALL no Sure noTesting Testing & TroubleshootingTroubleshooting Mic distorted No control over volume or toneForgot password Mic never activeGetting Help PM-3180 SpecificationsPM-3000 Spring Street Ramsey, NJ

PM-3000, PM-3180 specifications

The Bogen PM-3180 and PM-3000 are two powerful audio amplifiers designed to meet the diverse needs of various sound reinforcement applications, from commercial settings to large outdoor events. Both models are part of Bogen’s esteemed product lineup, known for their reliability, performance, and quality sound.

The Bogen PM-3180 is a high-performance amplifier capable of delivering up to 180 watts of power. It is designed for both commercial and institutional uses, featuring a versatile range of functionality. One of its significant attributes is the built-in mixing capabilities, allowing users to connect multiple audio sources effortlessly. With its broad frequency response and low total harmonic distortion, the PM-3180 ensures clear and robust audio output, making it suitable for music and speech applications alike.

In terms of connectivity, the PM-3180 offers various inputs, including balanced microphone inputs and unbalanced line inputs, catering to different audio source configurations. Its integral priority system allows for automatic switching in case of emergency announcements, ensuring critical communications get through without interruption. While operating, the PM-3180 remains energy-efficient, equipped with features that minimize power consumption while maximizing output.

On the other hand, the Bogen PM-3000 serves as an excellent companion for those with slightly lower power requirements, offering up to 150 watts of output. Its compact design makes it an ideal choice for applications where space is limited. Despite its size, the PM-3000 does not compromise on audio quality, delivering clean and distortion-free sound for various environments, such as classrooms, meeting rooms, and small events.

Both amplifiers utilize modern technology to ensure durability and performance. They incorporate advanced thermal protection, preventing overheating during extended use. Additionally, the PM-3000 includes a built-in LED power indicator that provides a visual cue of operational status. Both models are designed for easy installation and maintenance, featuring a user-friendly interface that simplifies adjustments and configuration.

In summary, the Bogen PM-3180 and PM-3000 amplifiers stand out for their exceptional features, performance-oriented design, and enduring reliability. Whether you're managing a school event, a business presentation, or a public address system, these amplifiers are equipped to deliver high-quality sound that meets your needs, backed by Bogen's longstanding reputation in the audio industry.
Top Page Image Contents