Bogen PM-3000, PM-3180 manual ALC on PPS OFF, In-Mic, Press ENT to store the selection

Page 32

Programming

4.The display shows A ALC ON indi- cating that MIC A ALC status is ON.

5.Press the NEXT or BACK but- tons to select ON or OFF.

6.Press ENT to store the selection.

7.The display shows A PPS OFF indi- cating that the MIC A phantom power is OFF. If Mic B is set as a TEL input (see below), PPS will not be shown since it does not apply to tel inputs.

8.Press the NEXT or BACK but- tons to select ON or OFF.

A ALC ON

A PPS OFF

9.Press ENT to store the selec-

tion. At this point, the display again shows the precedence display. Press EXIT to return to the function menu or press the MIC B button to configure MIC B.

Note: During mic configuration, you can switch between MIC A or MIC B. For example, when the display shows PPS (phantom power) for MIC

A, you can press MIC B and set the phantom power feature for MIC B. The same holds true for the PREC and ALC features.

To Set MIC B for TEL Operation

Located between the ALC and PHAN features is the MIC B TEL setup fea- ture:

1.The display shows B IN-MICwhich indicates that MIC B is set for use with microphones.

2.Press the NEXT or BACK buttons to select MIC or TEL.

3.Press ENT to store the selec- tion. If set for MIC, the next dis- play shows PPS. If set to TEL, the next display shows PREC.

B IN-MIC

4. Press EXIT to get to the main menu or continue with other functions.

27

Page 31 Page 33
Image 32
Page 31 Page 33
Contents User’s guide Models PM-3000 & PM-3180 User’s Guide Publication No July Owner’s Information Contents Accessories UnpackingPacking List ConventionsIntroduction DescriptionFeatures ProMatrix units have the following featuresPM-3180 has these additional features PM-3000 includesInstall Control Panel Quick StartTo mount the control panel in a remote location Fan Outlet PM-3180 only Do Not BlockBasic Wiring Factory Programmed Configuration Microphone Feature Default OptionsInput Priority Level = highest, 6 = lowestTo Apply Power to the Unit Basic OperationUnderstanding the Control Panel To Select an Amp or Preamplifier ChannelTo Control Volume To Control Bass or TrebleTo identify which amplifier is under manual control To Return to Auto SwitchingTo Select a Specific Input Aux Input Trim Adjustment Important Operational NotesRear Panel Model PM-3000 Rear Panel Model PM-3180 Auxa Infrared Remote Controller Wiring Information Outputs For PM-3000 PreamplifierOutputs For PM-3180 Amplifier Aux Input Trim Controls Audio Process Link Wiring PM-3180 OnlyAUX Inputs MIC Inputs Mic aMic B Mic B/TelTo Apply Power to the ProMatrix Unit User OperationProMatrix Control Panel To Select an Amp/ChannelTo Control Volume, Bass or Treble To Return to Auto Switching Important Operational NotesEnter Programming Mode ProgrammingDefaults Programming MenuA1/AUXA AssignmentProgramming To Set MIC Parameters Mic Set UpPrec VOX ALC on PPS OFF IN-MICPress ENT to store the selection Press ENT to store the selecPresets Remember to press ENT after setting each level A1/AUX A-0Volume Limit A1/AUXAProgramming A1/VOL OFF InhibitAux Mute A1 LNK Amplifier Link PM-3180 OnlyPassword PswrdAuxa LabelsFactory Defaults CLR ALL noSure no Press ENT to confirm the selectionTesting & Troubleshooting TestingTroubleshooting No control over volume or tone Forgot passwordMic never active Mic distortedGetting Help Specifications PM-3180PM-3000 Spring Street Ramsey, NJ

PM-3000, PM-3180 specifications

The Bogen PM-3180 and PM-3000 are two powerful audio amplifiers designed to meet the diverse needs of various sound reinforcement applications, from commercial settings to large outdoor events. Both models are part of Bogen’s esteemed product lineup, known for their reliability, performance, and quality sound.

The Bogen PM-3180 is a high-performance amplifier capable of delivering up to 180 watts of power. It is designed for both commercial and institutional uses, featuring a versatile range of functionality. One of its significant attributes is the built-in mixing capabilities, allowing users to connect multiple audio sources effortlessly. With its broad frequency response and low total harmonic distortion, the PM-3180 ensures clear and robust audio output, making it suitable for music and speech applications alike.

In terms of connectivity, the PM-3180 offers various inputs, including balanced microphone inputs and unbalanced line inputs, catering to different audio source configurations. Its integral priority system allows for automatic switching in case of emergency announcements, ensuring critical communications get through without interruption. While operating, the PM-3180 remains energy-efficient, equipped with features that minimize power consumption while maximizing output.

On the other hand, the Bogen PM-3000 serves as an excellent companion for those with slightly lower power requirements, offering up to 150 watts of output. Its compact design makes it an ideal choice for applications where space is limited. Despite its size, the PM-3000 does not compromise on audio quality, delivering clean and distortion-free sound for various environments, such as classrooms, meeting rooms, and small events.

Both amplifiers utilize modern technology to ensure durability and performance. They incorporate advanced thermal protection, preventing overheating during extended use. Additionally, the PM-3000 includes a built-in LED power indicator that provides a visual cue of operational status. Both models are designed for easy installation and maintenance, featuring a user-friendly interface that simplifies adjustments and configuration.

In summary, the Bogen PM-3180 and PM-3000 amplifiers stand out for their exceptional features, performance-oriented design, and enduring reliability. Whether you're managing a school event, a business presentation, or a public address system, these amplifiers are equipped to deliver high-quality sound that meets your needs, backed by Bogen's longstanding reputation in the audio industry.
Top Page Image Contents