Fusion MS-IP700, MS-AV700 manual Connections

CONNECTIONS

DESCRIPTION	COLOUR
Battery +12VDC	Yellow
Accessory +12V switched	Red
Negative Ground	Black
Remote Amplifier Enable ouput	Blue/White
Dim input [12VDC active]	Orange
Telemute input [GND active]	Brown

Note: All +12V wiring MUST be fused at the power source end of your cable, with a 15 A fuse. When the red “Accessory +12V switched” wire is not required in your installation, it MUST be connected together with the Yellow “Battery +12V” wire at the MS-700 head unit wiring loom.

When connecting the Dim input ensure the wire gauge used is suitable for the fuse supplying the circuit being connected to.

ANTENNA CONNECTION

Connect an AM/FM marine antenna.

Note: Do Not Connect to a VHF splitter

AUX INPUT

Connect an Auxiliary source to the left and right RCA (White = L, Red = R).

VIDEO CONNECTION

(MS-IP700 iPod/iPhone video only, MS-AV700 DVD video only)

Connect the composite video output (Yellow = Video) to a TV / LCD monitor

USB CONNECTION (MS-AV700 only)

Connect an Apple sync cable (not included), or USB Flash Drive (not included) or connect the MS-DKIPUSB Portable Media Device Dock (not included)

Note: MS-IP700 has internal USB socket

NMEA2000 / WIRED REMOTE

For connection to a MS-NRX200 Remote (not included).

For connection to an existing NMEA2000 Bus a MS-N2KCONN is required (not included)

To install a new NMEA2000 Bus a MS-N2KSTART is required (not included)

Note: FUSION recommends updating all remote(s) software via the MS-700 at time of installation to ensure compatibility. This can be done via the Update menu. Please refer to your remote manual for more information.

35