Fusion MS-AV700, MS-IP700 manual My FUSION

Page 61
My FUSION-

My iPod/iPhone will not connect to the Head unit while in the dock.

If your Head unit displays “Not Connected” while using iPod as input source:

•Check that you are using the correct sleeve combination. If you have the incorrect sleeve combination this could prevent the iPod connector from mating correctly. It could also dam- age the connector in the dock or your iPod/iPhone itself.

If you are uncertain which iPod model you have, go to http://www.apple.com/support/ to get the correct model information for your iPod and sleeve.

If you are still unable to connect once you know for certain you have the correct iPod/iPhone–sleeve combination:

•Ensure that you have the latest version of operating soft- ware installed in your iPod/iPhone and the latest iTunes version. To do this, connect your iPod/iPhone to iTunes and it will check and, if necessary, prompt you to download the latest version.

If you are still unable to connect once you have confirmed that you have the latest software or you have updated your iPod/iPhone:

•Reset the iPod/iPhone (see the user manual for your Apple product) and also reset the Head unit (see FUSION user manual).

If you are still unable to connect:

•Contact your FUSION dealer or contact FUSION via the tech email on the FUSION website.

Problem

Solution

Wireless Remote App for iPad and iPhone

My FUSION-

The first thing to check is that you are connected to the correct

Link Wireless

wireless network for the 700 series.Once you have confirmed this

application

close the App on the device and restart it (consult the manufacturers

displays “No

website for instructions on restarting) . If this fails check that you have

stereo available”

a valid IP address on the 700 series and follow the instructions in the

 

below tech support item

 

 

 

The first thing to check is that the 700 series is displaying a valid IP

My FUSION-Link

address on the about screen. Select the settings menu then about to

Wireless remote

confirm. If the display is “ IPNone “ the router is either not a compatible

aplication wil

DHCP product or not configured correctly. If the IP address starts

not connect to

with the prefix 169. it is not valid, this is a default address when the

my 700 Series

router is not sending a DHCP generated IP address or is configured

stereo

incorrectly. Please review the Router’s instruction manual or contact

 

the manufacturers website for technical help.

 

 

60

Page 60 Page 62
Image 61
Page 60 Page 62
Contents MS-AV700 MS-IP700700 SERIES Manual MARINE ENTERTAINMENT SYSTEMCare and Maintenance USING iPodWARNINGS AND CAUTIONS USB Flash DrivesREGISTER YOUR PRODUCT ONLINE CONTENTS Troubleshooting INSTALLING THE 700 SERIESSupport, Sales and Service SpecificationsUSER INTERFACE AND CONTROLS PowerMenu TunerROTARY ENCODER AND MENU KEY Accessing Menus Adjusting levelsUSING THE ROTARY ENCODER AND MENU KEY Opening Control Screens To power the unit on or offGETTING STARTED ADJUSTING VOLUME LEVEL To mute and unmute the volume To adjust the volume levelADJUSTING SUB-WOOFER LEVEL AND TONE To set sub-woofer levels or tone6. Press any key to exit To clear the alarm To set the alarmSETTING AND CLEARING THE ALARM 2. Turn the Rotary Encoder to adjust the brightness setting To adjust the brightness of the display screen1. Press the Brightness key. The Brightness screen is displayed 3. Press any key to exitAM/FM/VHF To select one of the available tuner bandsTUNER Figure 2 - Example AM band input source screenTo tune to a required frequency, channel or preset When tuning with this method… Tuningsettings menu, see ‘Setting up VHF’ AppliesTo remove one or more presets To add a new presetNote Up to 15 presets can be stored for each radio band Turning scan mode on Minimizing background noiseTo set the squelch level To turn scan mode oniPod To listen to input from your iPodCONTROLLING iPod PLAYBACK Selecting tracks from a playlistkeys. The selected track starts playing automatically Controlling PlaybackRepeat To change a setting in the iPod settings menuShuffle SearchingSubtitles To listen to music from your USB flash driveAlbum artwork USB FLASH DRIVEFor example, to select a Folder then track Selecting audio tracks from USB flash driveThe selected track starts playing automatically Controlling playback1. Press the Encoder to toggle the value on or off To change a highlighted setting in the USB settings menuRepeat mode is turned off Repeat the current selection Random play shuffle is turned offAUXILIARY INPUT To listen to input from an alternate auxiliary deviceADDITIONAL FEATURES FUSION MS-NRX200 Remote ControlFUSION-only installation NMEA-2000 bus installationDVD source selected MS-AV700 model onlyDVD source not selected Dimensions are in millimeters mm and inches ”. Not to scale INSTALLING THE 700 SERIESFigure 7 - Dimensions - top view Figure 8 - Dimensions - side view Figure 9 - Dimensions - front view CONNECTIONS ETHERNET CONNECTION BATTERY +12VDC ACCESSORY +12VDC NEGATIVE GROUND GND AMPLIFIER ON OUT REMOTE CONTROL NMEA2000 USB CONNECTIONANTENNA ZONE 1 R REDINSTALLATION 700 SERIES CONNECTION EXAMPLE Enabled Selecting and setting up a zoneSETTING UP THE 700 SERIES To enable or disable the selected ZoneTo enable or disable volume control Volume controlLink to zone To link Zone 2 level to Zone 1 levelTo specify the volume limit for the selected Zone Volume limitYou can access the screen Sub-woofer levelTo enter the name for the selected Zone When using your iPod with either modelBefore inserting iPod MS-IP700 modelTo insert your iPod or USB flash drive To connect your iPod, you will need MS-AV700 modelTo connect your USB flash drive, you will need 1. Press the door catch and open the door of the dock Adjusting Auxiliary input level Connecting auxiliary deviceSupported iPod sleeves To set the clock Recommended settings are listed belowaudio quality Activating your SiriusXM tuner To select 12 or 24 hour clock display modeSiriusXM SATELLITE RADIO Channels SiriusXM menu optionsTo select a channel Category Padlock iconTo select a Category Parental mode To change the Parental mode access codeTo enter Parental menu To access a locked channel 3. Enter your access codeChannel Locking / unlocking 1. Press the Menu key 2. Do one of the followingSub filter To lock or unlock a channelTo change the sub filter setting Power saveTo enable or disable the key sound To enable or disable power saving modeTo change the tuner region setting To change the Tel mute settingTo change the VHF region setting Tel muteTo enable or disable the AM of VHF tuner sources Factory ResetTo reset your 700 Series to factory default values SourcesTROUBLESHOOTING APPENDICESProblem Solutionto update software when Apple releases new versions. If you My FUSION Tuning range General specificationsSPECIFICATIONS Power outputSUPPORT, SALES AND SERVICE VHF tuning rangeJapan LICENSINGINDEX INDEX700 Series auxiliary inputremote controls presetssettings See troubleshootingsub-woofer level source screenstuner USB flash drivezones volumePage Page Page Page P/N MAN000001E Specifications and design are subject to change without notice
Related manuals
Manual 72 pages 47.06 Kb Manual 36 pages 32.67 Kb
Top Page Image Contents