Fusion MS-AV700, MS-IP700 manual Press the door catch and open the door of the dock

Page 47

To connect your iPod or USB flash drive to the 700 Series via a MS-DKIPUSB dock:

1.Press the door catch and open the door of the dock.

Portable media device dock

(MS-DKIPUSB)

2.Insert your USB flash drive into the USB connector or insert your iPod in its correct sleeve. Make sure that the device is firmly pushed onto the connector socket.

3.Close the door firmly.

4.Select input from the device, as required.

To connect your iPod to the 700 Series via an Apple Sync cable (AV700 only):

1.Plug the USB plug of your Sync Cable into the USB socket of the external USB cable on the MS-AV700.

2.Connect your iPod or iPhone to the 30-pin Connector of your Apple Sync Cable.

3.Select input from the device, as required.

Image 47

Contents MARINE ENTERTAINMENT SYSTEM MS-IP700MS-AV700 700 SERIES ManualUSB Flash Drives USING iPodCare and Maintenance WARNINGS AND CAUTIONSREGISTER YOUR PRODUCT ONLINE CONTENTS Specifications INSTALLING THE 700 SERIESTroubleshooting Support, Sales and ServiceTuner PowerUSER INTERFACE AND CONTROLS MenuROTARY ENCODER AND MENU KEY USING THE ROTARY ENCODER AND MENU KEY Adjusting levelsAccessing Menus GETTING STARTED To power the unit on or offOpening Control Screens ADJUSTING VOLUME LEVEL To mute and unmute the volume To adjust the volume levelADJUSTING SUB-WOOFER LEVEL AND TONE To set sub-woofer levels or tone6. Press any key to exit SETTING AND CLEARING THE ALARM To set the alarmTo clear the alarm 3. Press any key to exit To adjust the brightness of the display screen2. Turn the Rotary Encoder to adjust the brightness setting 1. Press the Brightness key. The Brightness screen is displayedFigure 2 - Example AM band input source screen To select one of the available tuner bandsAM/FM/VHF TUNERTo tune to a required frequency, channel or preset Applies TuningWhen tuning with this method… settings menu, see ‘Setting up VHF’Note Up to 15 presets can be stored for each radio band To add a new presetTo remove one or more presets To turn scan mode on Minimizing background noiseTurning scan mode on To set the squelch leveliPod To listen to input from your iPodCONTROLLING iPod PLAYBACK Selecting tracks from a playlistkeys. The selected track starts playing automatically Controlling PlaybackSearching To change a setting in the iPod settings menuRepeat ShuffleUSB FLASH DRIVE To listen to music from your USB flash driveSubtitles Album artworkFor example, to select a Folder then track Selecting audio tracks from USB flash driveThe selected track starts playing automatically Controlling playbackRandom play shuffle is turned off To change a highlighted setting in the USB settings menu1. Press the Encoder to toggle the value on or off Repeat mode is turned off Repeat the current selectionAUXILIARY INPUT To listen to input from an alternate auxiliary deviceADDITIONAL FEATURES FUSION MS-NRX200 Remote ControlFUSION-only installation NMEA-2000 bus installationDVD source selected MS-AV700 model onlyDVD source not selected Figure 7 - Dimensions - top view INSTALLING THE 700 SERIESDimensions are in millimeters mm and inches ”. Not to scale Figure 8 - Dimensions - side view Figure 9 - Dimensions - front view CONNECTIONS ETHERNET CONNECTION ZONE 1 R RED REMOTE CONTROL NMEA2000 USB CONNECTIONBATTERY +12VDC ACCESSORY +12VDC NEGATIVE GROUND GND AMPLIFIER ON OUT ANTENNAINSTALLATION 700 SERIES CONNECTION EXAMPLE To enable or disable the selected Zone Selecting and setting up a zoneEnabled SETTING UP THE 700 SERIESTo link Zone 2 level to Zone 1 level Volume controlTo enable or disable volume control Link to zoneSub-woofer level Volume limitTo specify the volume limit for the selected Zone You can access the screen To enter the name for the selected Zone When using your iPod with either modelTo insert your iPod or USB flash drive MS-IP700 modelBefore inserting iPod To connect your USB flash drive, you will need MS-AV700 modelTo connect your iPod, you will need 1. Press the door catch and open the door of the dock Supported iPod sleeves Connecting auxiliary deviceAdjusting Auxiliary input level audio quality Recommended settings are listed belowTo set the clock SiriusXM SATELLITE RADIO To select 12 or 24 hour clock display modeActivating your SiriusXM tuner To select a channel SiriusXM menu optionsChannels To select a Category Padlock iconCategory To enter Parental menu To change the Parental mode access codeParental mode 1. Press the Menu key 2. Do one of the following 3. Enter your access codeTo access a locked channel Channel Locking / unlockingSub filter To lock or unlock a channelTo enable or disable power saving mode Power saveTo change the sub filter setting To enable or disable the key soundTel mute To change the Tel mute settingTo change the tuner region setting To change the VHF region settingSources Factory ResetTo enable or disable the AM of VHF tuner sources To reset your 700 Series to factory default valuesSolution APPENDICESTROUBLESHOOTING Problemto update software when Apple releases new versions. If you My FUSION Power output General specificationsTuning range SPECIFICATIONSLICENSING VHF tuning rangeSUPPORT, SALES AND SERVICE Japanauxiliary input INDEXINDEX 700 SeriesSee troubleshooting presetsremote controls settingsUSB flash drive source screenssub-woofer level tunerzones volumePage Page Page Page P/N MAN000001E Specifications and design are subject to change without notice

Related manuals

Manual 72 pages 47.06 Kb

Manual 36 pages 32.67 Kb