proceed with activating your SIRIUS subscription.
AUDIO DC
OUT IN
ANT AUDIO OUT FM OUT DC IN
ANTENNA FM
OUT
Activating your SIRIUS Subscription
Before you can listen to the SIRIUS service, you need to subscribe to the SIRIUS Satellite Radio service.
1.Be sure that the Receiver is correctly installed and that the antenna is oriented to receive the SIRIUS signal.
2.Press the power button to turn Receiver On. After displaying the SIRIUS logo, the Receiver will update the SIRIUS channel line up. The display will show, “UPDATING CHANNELS” and show the status of the update.
U 
P 
D 
C 
H 
s 
X 
X 
%
Wait until the channel updates have completed before pressing any buttons on the Receiver.
3.Once the channels have been updated, the display will change to “Call
You will not be able to tune to any other channels until you activate your SIRIUS subscription.
C 
a 
l 
l 
1 
- 
8 
8 
8 
- 
5
4.To listen to the audio from your Receiver, you will need to tune the FM radio in your vehicle and the FM transmitter in the Receiver to the same FM frequency. The FM transmitter in the Receiver defaults to 88.1 MHz, so you can begin by tuning your FM radio to 88.1 MHz. If there is an FM station
| 11 |
SV1 Receiver User and Installation Guide |