Installation
Installation of your SV1 SIRIUS One is easy:
1.Choose a location in your vehicle where you will mount the Receiver, either on the visor, the dash, or the windshield.
2.Mount the Receiver on the visor using the visor/dash mount, or on the dash using the visor/dash mount and the velcro strips, or on the windshield using the suction cup mount.
3.Install the magnetic antenna on the roof of the vehicle, and route the antenna cable to the Receiver.
4.Connect the power cord for the Receiver to your vehicle’s cigarette lighter.
5.Subscribe to the SIRIUS service and begin enjoying the SIRIUS entertainment!
Location
Choose a location in your vehicle where the Receiver will not block your vision, interfere with the vehicle controls, or obstruct the air bag. If you are using the suction cup mount, the location should be suitable for using the suction cup mount, such as the windshield or other flat, smooth surface.
The location should be easily reachable and provide good visibility of the Receiver.
Mounting the Receiver
Attach the desired mounting device, suction cup mount or visor/dash mount, to the Receiver by sliding the flat portion of the mount into the slot on the back top edge of the Receiver. Gently slide the mounting device in until it snaps into place.
SNAP
SNAP
SV1 Receiver User and Installation Guide
7