Sirius Satellite Radio SV1 manual Factory Default

3. A 6 segment horizontal bar graph will be	reset by the Factory Default feature, preventing
displayed with a “-“ sign to the left and a “+” sign	someone from circumventing the Parental
to the right. The SAT screen indicates the	Control feature. Channels which have been
satellite signal strength while TER screen	locked will remain locked.
indicates the terrestrial signal strength, if a	To activate the Factory Default feature, and
terrestrial signal is available.	restore the features of the Receiver to the factory
To exit the Signal Level menu, press the MENU	defaults, do the following:
button.	1. Use the channel up and down buttons to
Factory Default		display the “Factory Default” menu option,
The Factory Default option will restore most every		and press the select button.
	2. Use the channel up and down buttons to
feature of the Receiver to the original factory
settings. The following is a list of all features		display “Yes” to restore all settings to the
affected by the Factory Default option:		settings from the factory, or display “No” to
• All Presets are cleared		leave them as-is and return to the Menu
		Options menu.
• Receiver set to Normal Tuning Mode
• Display brightness set to 50%
• Display Contrast set to 50%		R	e	s	e	t	?	Y
• FM Transmitter set to On
• FM Frequency set to 88.1 MHz
Note that the Parental Control feature is not affected
by the Factory Default option. If a code has been set		R	e	s	e	t	?	N
for the Parental Control feature, the code will not be
26
				SV1 Receiver User and Installation Guide