Panasonic CQ-C7105U Graphic Pattern, Still Image Pattern, Contrast, Clock ADJ

screen.

For using the remote control, hold down [SEL] (MENU) for 2 sec. or more.

DEMONSTRATION

Switching by [PUSH SEL].

Press []] or [[] to display the DISPLAY menu.

2

Display Setting

Adjustment to display on the DISPLAY menu

1 Press [MENU] to display the menu display.

For using the remote control, hold down

[SEL] (MENU) for 2 sec. or more.

GRAPHIC PATTERN

(Default: All)

Turn [VOL] to make a selection.

All: Sequential display from pattern A to C.

Pattern A-C

S.A.: 19-band display (Spectrum analyzer)

		STILL IMAGE PATTERN
		(Default: All)
	3 Turn [VOL] to select a function to be	Turn [VOL] to make a selection.
		All: Sequential display from pattern 1 to 10
	adjusted.
		No.1-10
	For using the remote
	control, use [}] or
Display	[{].
	4 Press [PUSH
	SEL] to adjust.	CONTRAST
	For using the remote control, use [BAND] (SET).
Menu
	5 Adjust the setting value.	(Setting range: 1 to 5, Default: Contrast 3)
		q : Tilting up view angle
DISPLAY	6 Press [PUSH SEL].
		w : Tilting down view angle
	For using the remote control, use [BAND] (SET).
	7 Press [MENU] to close the menu

CLOCK ADJ

Note: Adjust the clock when “ADJUST” appears on the display.

[[] : Adjusting minutes

[]] : Adjusting hours

ON: Demonstration screen at no operation

(default)

q : Forward

OFF: Regular screen

w : Backward

Notes:

¡ The graphic pattern and still image are changeable. (a page 31)

¡ If corrupted data is selected, “DISPLAY FILE INCOM- PLETE” appears. (a page 32)

30CQ-C7205U/C7105U