Panasonic CQ-C7105U operating instructions Channel selection, Preset channel selection

1 Press [SOURCE] to select the XM Satellite Radio mode.

2 Press [BAND] to select a band.

Flow
	Notes:
Operation	¡ Connect the optional XM receiver (XMD-1000).
	¡ To connect the XM receiver (XMD-1000), it is
	required to use an optional extension cord that is
	produced by XM exclusively for Panasonic prod-
	ucts.
	¡ “RADIO ID” is displayed with channel 0.
	¡ “UPDATING” is displayed during the update of the
	identification code.
	¡ “LOADING” is displayed during the acquisition of
	audio data or information.

ReceiverXM DisplayMode	Preset Number
	Band
	Artist name/Song title

Up to 6 channels can be preset in XM1 to XM3 respectively.

Preset channels can be simply called up by pressing [}] (P-SET) or [{] (P-SET).

Note: Direct selection can be executed with [1] to [6] buttons on remote control.

PresetChannel PRESET)SET:-(P	1 Tune into a channel.
	2 Hold down [}] or [{] for 2 sec. or
	more.
	3 Turn [VOL] to select a preset number.

English

3 Select a channel.

Channel selection

[]] (TUNE): Preceding channel

[[] (TUNE): Next channel

Preset channel selection

[{] (P-SET: Preset): Lower preset channel

[}] (P-SET: Preset): Higher preset channel

Notes:

¡ Direct selection can be executed with [1] to [6] buttons on remote control.

¡ A preset station is selectable by turning [VOL] and pressing [PUSH SEL] while the preset list screen is present on the monitor.

¡ The volume is not adjustable while the preset list

screen is present on the monitor.Receiver Channel number/name

XM

indicates the satellite receiver is ready.

4 Hold down [PUSH SEL] for 2 sec. or more, and the channel is written on the selected preset number.

Preset number/channel number blinks once.

Notes:

¡In step 2, a channel can be registered by holding down the numeric button [1] to [6] for 2 sec. or more.

¡To stop presetting channels, press [DISP: DISPLAY].

¡The operation above allows users to replace the cur- rent channel with the channel preset in the selected number while selecting a preset channel.

¡The channel may be different between when the chan- nel is preset and when the channel is called up because channel preset is performed using Service ID.

CQ-C7205U/C7105U15