Panasonic CQ-VD7700U, CQ-VD7500U Calendar, Touch Panel, Id-Code, Memory Clear, Month

G

L

I

: Previous menu

S

H

: Exit

40

Menu

Setting Value

Operations

CALENDAR

MONTH

Panel

MONTH : ] or [

default: Same as Clock

(Calendar Display)

Note: The calendar is not editable.

YEAR

YEAR : { or }

default: Same as Clock

Remote

(e.g. Holidays cannot be marked.)

TOUCH PANEL

This function is used only when there are some differences between the

touching position and the symbol position displayed on the monitor.

(Panel touch position adjustment)

This function is not used ordinarily.

Position difference between the touch-

q Touch the four corners of the touch panel counterclockwise.

ing position and the displaying symbol

w Touch

END

to finish this setup. Touch

AGAIN

to retry.

position may appear in the following

situations:

1. The display position adjustment is

Touch forth

Touch third

executed.

2. The system is initialized.

3. The power is turned off soon after

the touch panel is adjusted.

For the cases above, readjust the

touch panel position.

Note: This function can be performed

Touch first

Touch second

on the touch panel.

: Previous menu

: Exit

Menu

Setting Value

Operations

0

to

9

Panel

0

to

9

ID-CODE

4 digits numeric code

Remote

[0] to [9]

(ID Code Setting)

default: none

Prior to operating this unit, it is advis-

Caution: Record your regis-

How to set your ID code (for the first time)

able to assign a 4-digit ID code for

tered ID code and keep it in a

q Enter an 4 digit ID code.

security.

secure location. If you forget it,

w Enter the same 4 digit ID code again.

(Make sure to use four digits for ID

you will be unable to use the

How to change your ID code

code.)

unit. In case you forget the ID

q Enter the preset (old) 4 digit ID code.

Once the ID code has been set, the unit

code, please consult your near-

If the wrong ID code is entered, a new

cannot be operated if the main power

est Panasonic Servicenter.

ID code cannot be registered.

supply is disconnected then re-con-

Note: The inputted code is not

w Enter a new 4 digit ID code.

nected. It is electronically locked so

e Enter the new 4 digit ID code again.

that a thief can not use the stolen unit

displayed for your security.

unless that person knows the code you

How to cancel the known ID code

have set.

Note: Should your unit ever require service,

The ID code operation must be per-

cancel your ID code before sending for repair.

formed only by the person to whom

q Enter the preset (old) 4 digit ID code.

the unit belongs.

If the wrong ID code is entered, it is

Generally, it is not necessary to enter

not possible to cancel the ID code

function.

the ID code each time when using the

w Press and hold [ENTER] until

unit if it has never been disconnected

“Complete!” is displayed. The ID code

from the main power supply (car bat-

cancelling procedure is completed.

tery).

The unit now works without an ID

Note: The ID code setting cannot be

code.

Note: Refer to ID Code Input regarding

eliminated even by the memory clear

how to enter the ID code. (a page 6)

function.

NO

:

Panel

MEMORY CLEAR

no memory clear. The display

YES

OK

: Memory clearance

All current memories are returned to

returns to the previous one.

default settings.

CANCEL

: No Memory clearance

YES

:

Remote

Note: In the SD mode, SD MENU set-

default settings

[[] a [ENTER]

[[] a [ENTER]:

default: NO

tings are not returned to the default

setting even when YES is selected as

Memory clearance

[]] a [ENTER]: a

this setting.