Samsung DSR 9401 FTA manual Solarsat Setting, Auto Scanning, Manual Scanning

Page 11

DSR 9401 FTA / DSB-9401F / DSB-9401V

OPERATING THE RECEIVER

1.2.2 Installer Mode

After checking the positioner’s state, installer should use this menu. He should set the “Disable Limits” before using User mode.

Select the Drive Motor West/East and use the / keys to drive motor.

key drives to west and key drives to east.

Select “Enable Limit”, in order to enable “Set Limit”.

Select “Disable Limit”, in order to disable “Set Limit”.

Select “Reset Positioner” and key to reset positioner.

1.3 Solarsat Setting

This menu is only for the Solarsat antenna.

When you press this menu, you will get this message, “This menu is only for the

Solarsat antenna. If you have one-press OK, otherwise-press EXIT.”

You can set the value according to your location.

To set the Value of Date and Time, use the / keys to change the value.

Use the / keys to change position.

Use the / keys to move each filed.

OPERATING THE RECEIVER

1.4 Auto Scanning

The sub menu “Auto Scanning” will enable download of off-air channels automatically from the preprogrammed satellites.

To download channels automatically:

You can select All/Off/Only Free option mode in each satellite.

Off :

No Scan

All :

Scan all the channels

Only Free : Scan free channels

Press key.

Auto Scanning menu will be displayed.

All the channels in the list from the selected satellite will be automatically downloaded.

After scanning you will see "Your digital receiver found..." . Afterwards you return to Auto Scanning menu.

1.5 Manual Scanning

To tune-in new channels and weak signals, the STB has been provided with

the option "Manual Scanning" where the channel data can be entered by the user. After selecting the "5. Manual Scanning" from the Installation Menu, the following screen will be displayed:

Select the target satellite for manual search.

Load a transponder.

This option will enable the user to load any transponder from the preprogrammed list available within the receiver.

Nottee : When you enter Frequency after setting Load TR to New, the entered information must include at least one channel to make channel save possible.

Input the frequency of the transponder you want to find.

Input the symbol rate of the transponder you want to find.

DSR 9401 FTA / DSB-9401F / DSB-9401V

GB

GB-18

D I G I T A L

S A T E L L I T E

R E C E I V E R

GB-19

Image 11
Contents Instructions for use Mains Supply Safety Instructions9401F / DSB-9401V Content General FeaturesLocation of the Receiver Connecting Your STBCard Slot DescriptionThis key is used to toggle between normal & muted audio Use the key to switch between favorite listsIncrease or decrease the volume Numerical keys ~Basic Functions Service Transponder Service FavoritesService Alphabetical Service ProviderTeletext OSD InstallationOperating the Receiver Main MenuUser Mode Select Driving Mode LNB SettingPositioner Setting Manual Scanning Solarsat SettingAuto Scanning Delete Satellite Reset to Factory DefaultsChannel Organising Smatv ScanningFavorite Channels Delete Channel Move & Edit ChannelDelete All Channels Delete Scrambled ChannelsChange PIN Code To cancel the lockParental Lock Set Channel LockTime & Timer Setting System SetupOSD Setting Media SettingsSystem Information Software UpgradeDisposal Troubleshooting Technical SpecificationsAudio Decoder Network Interface Broadcasting Digital