DSR 9401 FTA /
| DSR |
CONNECTING YOUR "STB" | 9401 |
|
CONNECTING YOUR "STB" |
| FTA / |
|
| |
1. LOCATION OF THE RECEIVER | Connecting Figure | |
| ||
Your STB should be placed under proper ventilation. |
| |
|
| |
Don’t put in completely enclosed cabinet that will restrict the flow of air, |
| / |
| ||
resulting in overheating. |
| |
|
| |
The location should be safeguarded from direct sunlight, |
|
|
excess moisture, rough handling or household pets. |
|
|
Avoid stacking other electronic components on the top of the receiver. |
|
|
The location should be safely accessible by the cable from your |
|
|
antenna system. |
|
|
2. CONNECTING THE RECEIVER WITH DISH SYSTEM |
| |
After installing your antenna system, connect the coaxial cable from the |
| |
LNB of your antenna to "LNB" terminal marked at the rear | GB | |
of the STB. | ||
| ||
All cable connectors should be finger tightened; do not use any kind |
| |
of wrench while tightenning connectors. The cable should be 75ohm |
| |
impedance coaxial twisted at the end with an "F" type connector. |
|
3. CONNECTING THE RECEIVER TO TV
To connect the receiver with your television, you can use Scart Cable.
In the case of connecting your TV through SCART cable, connect the
SCART connector marked TV to the respective SCART port on the TV.
4. CONNECTING YOUR VCR
To connect a VCR, the STB has been provided with SCART at the rear marked "VCR".
Using a SCART connector, the VCR can be connected to the receiver. Note : This is supported by standby.
5. CONNECTING YOUR DIGITAL AUDIO SYSTEM
If you have a DAC with S/PDIF optical cable input, you can connect the STB with it to enjoy higher quality sound. Connect S/PDIF optical cable to a digital amplifier.
6.INSERTING SMARTCARDS FOR VIACCESS SERVICES (For model
In order to view a scrambled service, you need to have a valid Smartcard.
This
Note : Insert the Smartcard with the gold coloured chip facing downwards.
D I G I T A L | S A T E L L I T E | R E C E I V E R |