DSR 9401 FTA /
BASIC FUNCTION
8. Teletext OSD
When the current broadcasting program provides
Teletext OSD, press the Green (
) key twice to see the current Teletext OSD list.
To change the Teletext OSD:
●Use the 
/ 
keys to select a Teletext OSD you want.
●Press the 
key and then the Teletext OSD you want is displayed on the screen.
9. Teletext VBI
When the current broadcasting program provides
Teletext VBI, press the Green (
) key three times to see the current Teletext VBI list.
To change the Teletext VBI:
●Use the 
/ 
keys to select a Teletext VBI you want.
●Press the 
key and then the Teletext VBI you want is displayed on the screen.
OPERATING THE RECEIVER
Main Menu
After installing your antenna system and STB with appropriate connectors.
●Plug in the AC main power and switch on the receiver.
●Press MENU key to bring up the main menu.
The following on screen display will appear:
The sub menu topics will be displayed from 1 to 5.
For the
●You must follow the help message at the bottom of the screen!
Before you begin with the "Installation" menu, you should check in the 4th menu "System Setup" whether all the information there is applicable for you.
1. Installation
The menu provides settings for customizing, adding new services and displaying the status of the receiver.
●Select "Installation" in the main menu mode to select the sub menu.
●Enter the PIN Code.
If you have not entered your own PIN Code then the PIN Code 0000 applies, which was set at the factory.
D I G I T A L | S A T E L L I T E | R E C E I V E R |
DSR 9401 FTA /
GB