Pelco C572M View a Camera Preset, Operate a Camera Pattern, Change Speeds 1.3.6.1 Focus, Zoom

Page 37

1.3.4 View a Camera Preset

(for preset programming, see Section 2, 2.1 Programming Presets):

To manually view any programmed preset

1. Select the camera for which you want to view a preset by entering the camera number and pressing the CAM key.

2. Enter the preset number and press the PRE- SET key.

1.3.5 Operate a Camera Pattern

1.Select a camera with a programmed pattern (see Section 2, 2.2 Programming Patterns).

2.Do one of the following:

• If you have just one pattern, press the

PATTERN button to start it.

• If you have two patterns, press either 1 or 2 and then the PATTERN button to start the desired pattern. (Be careful not to hold down the PATTERN button or you will enter programming mode and erase the existing pattern.)

3. Perform a PTZ function to stop the pattern.

Figure 3-5

Operating a Single Pattern

1.3.6Change Speeds 1.3.6.1 Focus

Do the following to change the focus speed of cameras with remote control focus:

1.Press a number between 1 (slowest) and 4 (fastest) for the focus speed.

2.Press the FOCUS FAR button. The camera now focuses at the speed you entered until it is changed.

1.3.6.2 Zoom

Do the following to change the zoom speed of cameras with remote zoom control:

•KBD200–Press a number between 1 (slowest) and 4 (fastest) for the zoom speed, then press the ZOOM WIDE key.

•KBD300/KBD300V–Press a number between 1 (slowest) and 4 (fastest) for the zoom speed, then twist the joystick zoom knob counterclockwise (zoom wide). The camera now zooms at the speed you entered until it is changed.

1.3.6.3 Pan

Figure 3-4

Viewing Presets

Figure 3-6

Operating Dual or Half Patterns

Figure 3-7

Zoom Operation

To change the pan speed of cameras with variable speed hooked to a keyboard without a joy- stick, enter a number between 1 (slowest) and 9 (fastest) followed by a left or right pan command. The camera pans at the speed you entered until it is changed.

1.3.7 Turning ZONES ON/OFF

• To turn zones on: press 8, 8, PRESET.

•To turn zones off: press 8, 9, PRESET.

Figure 3-8

Turning Zones Off and On

3-2C1510M-A (2/03)

SECTION 3

Page 36 Page 38
Image 37
Page 36 Page 38
Contents D E N D U M Page Page O N T Manual Notes Manual Directory Physical IntroductionCOM Connection Section Physical Installation9760 Side CC1 to Wall Block Video TIE LinesSAT Side Wall Block to SAT SAT SideLocal Monitor Additional SAT ConnectionsLink or Satellite Cameras Video Inputs Table aReceivers AlarmsLocal Keypads AuxsThis page intentionally left blank Section Preliminaries Programmingeliminaries and ConfigurationUnconventional Programming Configurations Programming Diagram TwoInformation BOX Preliminariesogramming and ConfigurationLocal Keyboard Initialization Section Programming and Configuration SAT Menu ProgrammingWord about the Menu Discussion Layout 6C1510M-A 2/03 Programming and Configuration 8C1510M-A 2/03 Remaining lines can be configured as desired 10C1510M-A 2/03 Programming and Configuration 12C1510M-A 2/03 Programming and Configuration 14 C1510M-A 2/03 Programming and Configuration Other SAT Programming Programming PresetsProgramming Patterns Programming Zones Comms File 9760 MGR-SAT ProgrammingLink Cameras File Cameras FileAlarms File 22C1510M-A 2/03 Local SAT Operations Section OperationSelecting Monitors Selecting CamerasOperate a Camera Pattern View a Camera PresetChange Speeds 1.3.6.1 Focus ZoomOperating Sequences Controlling Auxiliaries 9760-SAT OperationsSelecting Link Satellite Cameras Operating Suggestions Controlling Link CamerasLink Camera Availability Local SAT Alarm Response Alarm Operations9760 SYSTEM-SAT Alarm Response 9760 keyboard Two SAT Units on the Same Node SAT and SAT-ALARM Unit ConfigurationsInformation BOX Alarm Base Addressing SATs and Alarm Units on the Same NodeWorking Rules System Example Section System and Multipliexer ExampleOverview 2C1510M-A 2/03 Basic System Example 4C1510M-A 2/03 Basic System Example 6C1510M-A 2/03 Attach and configure alarm inputs and wiring 8C1510M-A 2/03 Operation of the System Example 090538 16/08/00 Nd01 Alarm 0001 Trigger SAT Alarm Op01 Pr0990538 16/08/00 Nd01 Switcammon Camera 5007 Monitor 001 Op Example Overview Multiplexer ExamplesPart I Mux Control from the 9760 Side Example TWO MUX Control in a 9760-SAT System EnvironmentBasic System Example Part II Mux Control from the SAT Side Appendix I Communication and Connection Tutorial Section AppendicesAppendix II Remote Keypad Connection KBD300s Wired to the Remote Port KBD300 and KBD300V Attached to Remote Port KBD200 Keyboard Functions Appendix III Keypad Definitions and Templates4A 4B Appendix IV Models and Associated Equipment Appendix V Default Menu Reset AssignmentsIV-1 Models IV-2 Associated EquipmentKeyboard Factory Default Menu Settings Appendix VI Connector Pinout Listings of ALL Connectors 10C1510M-A 2/03 Section Miscellaneous Important Safeguards and WarningsSwitching SpecificationsMXB IndexProgramming Warranty Regulatory Notices Warranty and Return InformationISO9001
Related manuals
Manual 41 pages 16.88 Kb Manual 17 pages 15.69 Kb

C578M, C572M, C539M-A, C543M-A, C579M specifications

Pelco, a leader in advanced video surveillance technology, offers a range of high-performance cameras designed to meet the diverse needs of professional security applications. The Pelco C578M, C1501M, C573M-D, C539M-A, and C572M models represent the latest innovations in surveillance technology, combining superior image quality, robustness, and flexibility.

The Pelco C578M is a high-resolution dome camera equipped with advanced features such as digital noise reduction and wide dynamic range, ensuring clear images in varying lighting conditions. Its 4MP image sensor provides exceptional detail, making it ideal for critical environments where clarity is paramount. The C578M supports H.265 compression technology, significantly reducing bandwidth and storage requirements while maintaining superior image quality.

The C1501M model is designed for outdoor environments, featuring an IP66-rated enclosure to withstand harsh weather. This camera comes with a 2MP resolution and a 3.6mm fixed lens, providing a wide field of view. Its built-in infrared capabilities enable night vision, allowing for effective surveillance even in complete darkness, making it an ideal choice for perimeter security.

Next, the C573M-D offers dual functionality with its PTZ capabilities. This camera can pan, tilt, and zoom, allowing for flexible monitoring of large areas. With a 5MP resolution, it captures detailed images that are essential for identifying subjects in diverse scenes. The C573M-D is equipped with analytics features such as motion detection and line crossing, enhancing its capability to react to potential security threats.

The C539M-A is notable for its advanced analytics integration, which enables intelligent video analysis. Featuring a wide-angle lens and 4MP resolution, this camera excels in applications requiring both broad coverage and detailed monitoring. The built-in audio support further enhances situational awareness, making it a versatile tool for comprehensive surveillance.

Lastly, the C572M boasts a compact design without compromising on performance. This camera features a 4MP image sensor and is ideal for discreet installations. Its ability to operate seamlessly with existing security infrastructures via ONVIF compatibility enhances its appeal for system integrators.

In conclusion, Pelco’s C578M, C1501M, C573M-D, C539M-A, and C572M cameras exemplify cutting-edge surveillance technology. Each model offers unique features tailored to different security challenges, ensuring that users can find the right solution for their specific needs without compromising on quality or performance. Whether for indoor or outdoor applications, these cameras represent Pelco’s commitment to providing reliable and effective security solutions.
Top Page Image Contents