Pelco C578M, C1501M, C1503M, C549M-A, C542M-B, C538M, C541M-C, C573M-D, C544M, C579M Operating Sequences

Page 38

1.4 OPERATING SEQUENCES

Each monitor (video output) has one 16-step sequence that can be run forward or backward, stopped (by placing the sequence on hold), or stepped through by pressing either PREV or NEXT while the sequence is on hold. The sequence status indicator (see Figure 3-9) displays the current state of a monitor sequence.

1.4.1 Run a Sequence Forward or Backward

Hold down either the NEXT (forward) or the PREV (backward) key for two seconds to begin running a sequence. The sequence status indicator under the camera number displays an F (for forward) or B (for backward) when the sequence begins.

Figure 3-9

Sequence Status and Sequence Display Characteristics

Figure 3-10

Forward and Backward Sequence Operation

1.4.2 Change the Direction of a Sequence

The direction of any currently operating sequence can be reversed. If, in the examples of Figure 3-10, you press the PREV button while the sequence is running forward, the sequence will run backward. The sequence status indicator will reflect this change by changing from F to B. Similarly, pressing the NEXT button while the sequence is running backward starts it running forward.

1.4.3 Step Through a Sequence

You can step through a camera sequence in the order the sequence is running (forward or backward) or when a sequence is on hold.

•When the Sequence Status Indicator displays B (sequence is running backward), press the PREV key to step through the sequence.

•When the Sequence Status Indicator displays F (sequence is running forward), press the NEXT key to step through the sequence.

•When the Sequence Status Indicator displays H (sequence is on hold), press the PREV button to step backward through the sequence or the NEXT button to step forward through the sequence.

Figure 3-11

Sequence Hold

1.4.4 Stop a Sequence

The two ways to stop a sequence are as follows:

•Press the HOLD button. The indicator under the camera

number displays an H (for hold).

• Select a camera.

1.4.5 Turn OFF a Sequence

Manually select a camera or press the CAM button.

NOTE: Whether or not a camera is available at your monitor viewing location is determined in the access menu (see Section 2, Access Programming Menu). Of those available, which CAM is used and the order of its appearance is determined by the monitor CAMERA SE- QUENCE sub-menu (see Section 2, Monitor Programming Menu-Page 2 of 3).

OPERATION

CM9760-SAT

3-3

Page 37 Page 39
Image 38
Page 37 Page 39
Contents D E N D U M Page Page O N T Manual Notes Manual Directory Introduction PhysicalSection Physical Installation COM ConnectionSAT Side Wall Block to SAT Video TIE Lines9760 Side CC1 to Wall Block SAT SideLink or Satellite Cameras Video Inputs Additional SAT ConnectionsLocal Monitor Table aAlarms ReceiversAuxs Local KeypadsThis page intentionally left blank Programmingeliminaries and Configuration Section PreliminariesProgramming Diagram Two Unconventional Programming ConfigurationsPreliminariesogramming and Configuration Information BOXSection Programming and Configuration SAT Menu Programming Local Keyboard InitializationWord about the Menu Discussion Layout 6C1510M-A 2/03 Programming and Configuration 8C1510M-A 2/03 Remaining lines can be configured as desired 10C1510M-A 2/03 Programming and Configuration 12C1510M-A 2/03 Programming and Configuration 14 C1510M-A 2/03 Programming and Configuration Programming Presets Other SAT ProgrammingProgramming Patterns Programming Zones 9760 MGR-SAT Programming Comms FileCameras File Link Cameras FileAlarms File 22C1510M-A 2/03 Selecting Monitors Section OperationLocal SAT Operations Selecting CamerasChange Speeds 1.3.6.1 Focus View a Camera PresetOperate a Camera Pattern ZoomOperating Sequences Selecting Link Satellite Cameras 9760-SAT OperationsControlling Auxiliaries Link Camera Availability Controlling Link CamerasOperating Suggestions Alarm Operations Local SAT Alarm Response9760 SYSTEM-SAT Alarm Response 9760 keyboard SAT and SAT-ALARM Unit Configurations Two SAT Units on the Same NodeWorking Rules SATs and Alarm Units on the Same NodeInformation BOX Alarm Base Addressing Overview Section System and Multipliexer ExampleSystem Example 2C1510M-A 2/03 Basic System Example 4C1510M-A 2/03 Basic System Example 6C1510M-A 2/03 Attach and configure alarm inputs and wiring 8C1510M-A 2/03 090538 16/08/00 Nd01 Alarm 0001 Trigger SAT Alarm Op01 Pr09 Operation of the System Example90538 16/08/00 Nd01 Switcammon Camera 5007 Monitor 001 Op Multiplexer Examples Example OverviewExample TWO MUX Control in a 9760-SAT System Environment Part I Mux Control from the 9760 SideBasic System Example Part II Mux Control from the SAT Side Section Appendices Appendix I Communication and Connection TutorialAppendix II Remote Keypad Connection KBD300s Wired to the Remote Port KBD300 and KBD300V Attached to Remote Port Appendix III Keypad Definitions and Templates KBD200 Keyboard Functions4A 4B IV-1 Models Appendix V Default Menu Reset AssignmentsAppendix IV Models and Associated Equipment IV-2 Associated EquipmentKeyboard Factory Default Menu Settings Appendix VI Connector Pinout Listings of ALL Connectors 10C1510M-A 2/03 Important Safeguards and Warnings Section MiscellaneousSpecifications SwitchingIndex MXBProgramming Regulatory Notices Warranty and Return Information WarrantyISO9001
Related manuals
Manual 41 pages 16.88 Kb Manual 17 pages 15.69 Kb

C578M, C572M, C539M-A, C543M-A, C579M specifications

Pelco, a leader in advanced video surveillance technology, offers a range of high-performance cameras designed to meet the diverse needs of professional security applications. The Pelco C578M, C1501M, C573M-D, C539M-A, and C572M models represent the latest innovations in surveillance technology, combining superior image quality, robustness, and flexibility.

The Pelco C578M is a high-resolution dome camera equipped with advanced features such as digital noise reduction and wide dynamic range, ensuring clear images in varying lighting conditions. Its 4MP image sensor provides exceptional detail, making it ideal for critical environments where clarity is paramount. The C578M supports H.265 compression technology, significantly reducing bandwidth and storage requirements while maintaining superior image quality.

The C1501M model is designed for outdoor environments, featuring an IP66-rated enclosure to withstand harsh weather. This camera comes with a 2MP resolution and a 3.6mm fixed lens, providing a wide field of view. Its built-in infrared capabilities enable night vision, allowing for effective surveillance even in complete darkness, making it an ideal choice for perimeter security.

Next, the C573M-D offers dual functionality with its PTZ capabilities. This camera can pan, tilt, and zoom, allowing for flexible monitoring of large areas. With a 5MP resolution, it captures detailed images that are essential for identifying subjects in diverse scenes. The C573M-D is equipped with analytics features such as motion detection and line crossing, enhancing its capability to react to potential security threats.

The C539M-A is notable for its advanced analytics integration, which enables intelligent video analysis. Featuring a wide-angle lens and 4MP resolution, this camera excels in applications requiring both broad coverage and detailed monitoring. The built-in audio support further enhances situational awareness, making it a versatile tool for comprehensive surveillance.

Lastly, the C572M boasts a compact design without compromising on performance. This camera features a 4MP image sensor and is ideal for discreet installations. Its ability to operate seamlessly with existing security infrastructures via ONVIF compatibility enhances its appeal for system integrators.

In conclusion, Pelco’s C578M, C1501M, C573M-D, C539M-A, and C572M cameras exemplify cutting-edge surveillance technology. Each model offers unique features tailored to different security challenges, ensuring that users can find the right solution for their specific needs without compromising on quality or performance. Whether for indoor or outdoor applications, these cameras represent Pelco’s commitment to providing reliable and effective security solutions.
Top Page Image Contents