Pelco C542M-B, C1501M, C1503M, C549M-A, C538M, C541M-C, C573M-D, C544M, C579M SYSTEM-SAT Alarm Response

Page 42

3.2 9760 SYSTEM-SAT ALARM RESPONSE

The response to an alarm that is pro- grammed and armed at the local, SAT level, can also be configured for a corresponding 9760 SIDE alarm notification and response. For this to occur, the System Alarm column for the alarm in question must be edited. This occurs in the local SAT Alarm menu.

A System Alarm column entry completes SAT SIDE programming menu require- ments for a CM9760-KBD keyboard user to be notified of the corresponding local alarm if proper programming for alarm response functions have been configured on the 9760 SIDE of the system.

Consider, for a moment, that the SAT alarm sub-menu for alarm contacts 1-8 is config- ured as shown in Figure 3-17.

As shown, Alarm #1 activation is not only set for SAT SIDE alarm notification but will also send a System Alarm notifi- cation number of 0001 to the CM9760-CC1 when the local SAT alarm occurs.

The alarm functions in the following configuration files (housed in the 9760-CC1 but programmed using the 9760- MGR program) must be configured before the 9760 key- board user can be notified of and view the alarm:

In the Comms file:

1.Each keyboard must be assigned Alarm monitors if a visual display of the alarm camera (in addition to key- board notification) is desired. For example, note that in Figure 3-18, keyboard number 2 is assigned alarm monitors 1 through 5.

In the Alarms file:

2.The number entered in the System Alarms column of the ALARMS menu on the SAT SIDE corresponds to the number found in the Physical Number column of the ALARM configuration file on the 9760 SIDE. The number in the associated Logical Number column of the ALARM file is used to ARM the alarm from the 9760 keyboard. The camera to be called in response to Alarm 1 being activated is entered into the Alarm Camera Switch sub-menu of the ALARM file.

NOTE: To enable 9760-SIDE, automatic acknowlegment of alarms, fill in the Auto Reset (see Figure 3-19) column for the associated alarm with a time (in seconds) that you want the alarm to remain active before it is reset.

NOTE: Local and System alarm notifications are mutu-

ally exclusive: both, or one, or neither can occur based on programming.

Figure 3-17

Alarm Contact Menu

Figure 3-18

Assigning Alarm Monitors

Figure 3-19

Configuring 9760 SIDE Alarm Response Numbers

OPERATION

CM9760-SAT

3-7

Page 41 Page 43
Image 42
Page 41 Page 43
Contents D E N D U M Page Page O N T Manual Notes Manual Directory Introduction PhysicalSection Physical Installation COM ConnectionSAT Side Wall Block to SAT Video TIE Lines9760 Side CC1 to Wall Block SAT SideLink or Satellite Cameras Video Inputs Additional SAT ConnectionsLocal Monitor Table aAlarms ReceiversAuxs Local KeypadsThis page intentionally left blank Programmingeliminaries and Configuration Section PreliminariesProgramming Diagram Two Unconventional Programming ConfigurationsPreliminariesogramming and Configuration Information BOXSection Programming and Configuration SAT Menu Programming Local Keyboard InitializationWord about the Menu Discussion Layout 6C1510M-A 2/03 Programming and Configuration 8C1510M-A 2/03 Remaining lines can be configured as desired 10C1510M-A 2/03 Programming and Configuration 12C1510M-A 2/03 Programming and Configuration 14 C1510M-A 2/03 Programming and Configuration Programming Presets Other SAT ProgrammingProgramming Patterns Programming Zones 9760 MGR-SAT Programming Comms FileCameras File Link Cameras FileAlarms File 22C1510M-A 2/03 Selecting Monitors Section OperationLocal SAT Operations Selecting CamerasChange Speeds 1.3.6.1 Focus View a Camera PresetOperate a Camera Pattern ZoomOperating Sequences 9760-SAT Operations Controlling AuxiliariesSelecting Link Satellite Cameras Controlling Link Cameras Operating SuggestionsLink Camera Availability Alarm Operations Local SAT Alarm Response9760 SYSTEM-SAT Alarm Response 9760 keyboard SAT and SAT-ALARM Unit Configurations Two SAT Units on the Same NodeSATs and Alarm Units on the Same Node Information BOX Alarm Base AddressingWorking Rules Section System and Multipliexer Example System ExampleOverview 2C1510M-A 2/03 Basic System Example 4C1510M-A 2/03 Basic System Example 6C1510M-A 2/03 Attach and configure alarm inputs and wiring 8C1510M-A 2/03 090538 16/08/00 Nd01 Alarm 0001 Trigger SAT Alarm Op01 Pr09 Operation of the System Example90538 16/08/00 Nd01 Switcammon Camera 5007 Monitor 001 Op Multiplexer Examples Example OverviewExample TWO MUX Control in a 9760-SAT System Environment Part I Mux Control from the 9760 SideBasic System Example Part II Mux Control from the SAT Side Section Appendices Appendix I Communication and Connection TutorialAppendix II Remote Keypad Connection KBD300s Wired to the Remote Port KBD300 and KBD300V Attached to Remote Port Appendix III Keypad Definitions and Templates KBD200 Keyboard Functions4A 4B IV-1 Models Appendix V Default Menu Reset AssignmentsAppendix IV Models and Associated Equipment IV-2 Associated EquipmentKeyboard Factory Default Menu Settings Appendix VI Connector Pinout Listings of ALL Connectors 10C1510M-A 2/03 Important Safeguards and Warnings Section MiscellaneousSpecifications SwitchingIndex MXBProgramming Regulatory Notices Warranty and Return Information WarrantyISO9001
Related manuals
Manual 41 pages 16.88 Kb Manual 17 pages 15.69 Kb

C578M, C572M, C539M-A, C543M-A, C579M specifications

Pelco, a leader in advanced video surveillance technology, offers a range of high-performance cameras designed to meet the diverse needs of professional security applications. The Pelco C578M, C1501M, C573M-D, C539M-A, and C572M models represent the latest innovations in surveillance technology, combining superior image quality, robustness, and flexibility.

The Pelco C578M is a high-resolution dome camera equipped with advanced features such as digital noise reduction and wide dynamic range, ensuring clear images in varying lighting conditions. Its 4MP image sensor provides exceptional detail, making it ideal for critical environments where clarity is paramount. The C578M supports H.265 compression technology, significantly reducing bandwidth and storage requirements while maintaining superior image quality.

The C1501M model is designed for outdoor environments, featuring an IP66-rated enclosure to withstand harsh weather. This camera comes with a 2MP resolution and a 3.6mm fixed lens, providing a wide field of view. Its built-in infrared capabilities enable night vision, allowing for effective surveillance even in complete darkness, making it an ideal choice for perimeter security.

Next, the C573M-D offers dual functionality with its PTZ capabilities. This camera can pan, tilt, and zoom, allowing for flexible monitoring of large areas. With a 5MP resolution, it captures detailed images that are essential for identifying subjects in diverse scenes. The C573M-D is equipped with analytics features such as motion detection and line crossing, enhancing its capability to react to potential security threats.

The C539M-A is notable for its advanced analytics integration, which enables intelligent video analysis. Featuring a wide-angle lens and 4MP resolution, this camera excels in applications requiring both broad coverage and detailed monitoring. The built-in audio support further enhances situational awareness, making it a versatile tool for comprehensive surveillance.

Lastly, the C572M boasts a compact design without compromising on performance. This camera features a 4MP image sensor and is ideal for discreet installations. Its ability to operate seamlessly with existing security infrastructures via ONVIF compatibility enhances its appeal for system integrators.

In conclusion, Pelco’s C578M, C1501M, C573M-D, C539M-A, and C572M cameras exemplify cutting-edge surveillance technology. Each model offers unique features tailored to different security challenges, ensuring that users can find the right solution for their specific needs without compromising on quality or performance. Whether for indoor or outdoor applications, these cameras represent Pelco’s commitment to providing reliable and effective security solutions.
Top Page Image Contents