positions on the surface until an audio output is heard. The desired antenna position should be marked with masking tape or by another
d.After determining the optimum position, turn off Xpress XM power, disconnect the power adapter from the vehicle cigarette lighter receptacle and disconnect the antenna cable.
e.Plan the routing of the antenna cable to the
cradle. Make sure you avoid any obstructions | ANTENNA |
that could crimp, kink or twist the cable; use |
|
protective grommets wherever rough openings |
|
are encountered. |
|
f. Route the cable from the antenna position to |
|
the interior of the vehicle, working the cable |
|
under the rear window molding; make |
|
adjustments and take up slack whenever |
|
necessary. |
|
ROUTING
THE CABLE
128-7472
13 of 16