Audiovox XMC10 manual 128-7472

Page 14

g.At the lowest point of the rear window, route the cable into the trunk, taking advantage of existing cable conduits. Then snake the cable around the passenger compartment to the back of the XMC10 cradle.

h.In SUV’s, minivans, etc., route the cable into the vehicle under the rubber molding of the hatch door or tailgate, and then under the interior trim.

NOTE: Avoid exposing the cable in the driver and passenger areas where it could become entangled in feet or other objects.

i.Plug the antenna cable into the ANT connector on the back of the cradle; then plug the cigarette lighter adapter into the lighter receptacle.

j.You are now ready to enjoy XM programming within your vehicle.

-14-

128-7472

14 of 16

Image 14
Contents Xpress Satellite Radio Receiver Contents Congratulations 128-7472 Contents XMC10 Installing the Cradle Mount Base Assembly Installation/Wiring PrecautionsSetting Up and Installing Your Kit Cabling InterconnectionsInterconnect Diagram Left Side View128-7472 Using Other Manufacturer’s Mounts Connection Options 128-7472 Mounting the Vehicle Antenna Antenna 128-7472 Month Limited Warranty 128-7472