Audiovox XMC10 manual Mounting the Vehicle Antenna

Page 12

7.Mounting the Vehicle Antenna

The antenna should be placed on a relatively flat surface on the vehicle exterior, preferably on the roof (high point) or on the trunk (convertible). To mount the antenna:

a.Plug the antenna into the ANT connector on the back of the cradle.

b.Place the antenna at the preferred location on the roof or trunk surface. If the vehicle is equipped with a roof or trunk rack, the antenna may have to be mounted off-center on the surface. The magnet will secure the antenna in the desired position.

c.Apply power to the Xpress XM system as outlined in the associated User Guide and obtain an audio output. If no audio is heard, first check the signal strength indicator located on the bottom left corner of the display to ensure the antenna is receiving an optimum signal. If necessary, move the antenna to different

-12-

Xpress

SYSTEM (TYPICAL)

12V-TO-5V

DCPOWER

ADAPTER

SAT ANTENNA (TYPICAL)

128-7472

12 of 16

Image 12
Contents Xpress Satellite Radio Receiver Contents Congratulations 128-7472 Contents XMC10 Installation/Wiring Precautions Setting Up and Installing Your KitInstalling the Cradle Mount Base Assembly Cabling InterconnectionsInterconnect Diagram Left Side View128-7472 Using Other Manufacturer’s Mounts Connection Options 128-7472 Mounting the Vehicle Antenna Antenna 128-7472 Month Limited Warranty 128-7472