Installation, Personal computer | TechniSat AX1 specification

Outdoor unit:
V/H-LNB
ST 3004 S	ADR
	HiFi

In this case you cannot receive TV channels and digital radio channels at the same time.

As soon as the ADR receiver is disconnected from the network or the ADR receiver is in standby mode the LNB voltage is switched through to the LNB by the satellite television receiver.

Moreover, you can connect the audio outputs of your satellite television receiver to the audio analogue inputs of your ADR receiver. The audio signals of the satellite television receiver are transmitted to the amplifier when the ADR receiver is disconnected from the network or is in standby mode.

3.4 Personal computer

You can connect a personal computer to the female connector PC IN/OUT that can be used to control the ADR receiver. The software and connection cables you can buy from your TechniSat sales representative.

4 Installation

4.1 Calling the installation menu

The installation menu includes the most important basic settings for the set-up of the ADR receiver. It can only be called with the help of a multiple key operation so that none of the settings are modified by mistake.

> switch off the ASTRASTAR AX 1 with

> press or on the ADR receiver and

> at the same time switch on the receiver again with

The individual settings are marked in the channel number display with the stages E1 to E7. The function which is to be modified is indicated via the information display.

E1 setting the remote control code

E2 selecting the display language

E3 adapting the local oscillator frequency

E4 selecting the search mode for Astra or other satellites

E5 selecting the search range

E6 deleting the channel memory

E7 copying the preprogrammation

The individual settings E1, E4 and E5 only serve for service purposes or are provided for future applications.

A modification becomes effective when switching to the next stage.