4.2 LOF adjustment
To adapt the ADR receiver to older outdoor equipments you can modify the
>call the installation menu (see 4.1)
>call setting E3 “LOF 9750” with 
or
> switch to “LOF 10000” or “ISI_AB” or “ISI_ABC” with
or
>press 
or 
repeatedly until “Standby” appears in the display
Analogously, you can remodify the LOF to 9.75 GHz. Please take into consideration that you cannot receive all ADR channels with an ISISAT equipment.
4.3 Display language
You can switch the display language between German, English, Danish and Swedish.
>call the installation menu (see 4.1)
>call setting E2 “German” with 
or 
>switch to the desired language with 
or
>press 
or 
repeatedly until “Standby” appears in the display
Correspondingly, you can switch the display language again to German. The messages of the smart card are not affected by this modification. They always appear in English.
4.4 Deleting all channels
If you want to completely reprogramme your ASTRASTAR AX 1 you can delete the entire channel memory. Take into consideration that afterwards you have to programme new channels according to 6 “Programming”.
To avoid an unintended deletion of all channels a multiple safety interrogation is integrated.
>call the installation menu (see 4.1)
>call setting E6 “delete?” with 
or 
>switch to “really?” with 
or 
>switch to “with RC!” with 
or 
>delete the channel table using the recessed delete key
( | ) of the remote control |
|
The function can be interrupted before pressing | (delete) | |
with 
or 
without deleting the channels.
8